FORTIN 2008 Kia Amanti Regular Key Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

VEHICLE YEARS
KIA Amanti
2007-2009

2008 Kia Amanti Regular Key Remote Starters and Alarm Systems

Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass
• T-Harness available (sold separately)
• Lock
• Unlock
• Arm
• Disarm
• Parking Light
• Trunk (open)
• RAP Disable
• Tachometer
• Door Status
• Trunk Status
• Foot-Brake Status

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT 76.[60] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program bypass option:

Program bypass option
(If equiped with OEM alarm):

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

SECURITY STICKER

WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

Press and hold the
programming button: Insert the 6-Pin Main connector.
↪ The BLUE, YELLOW, RED and BLUE & RED LEDs will alternatively illuminate.

Release the programming button when the YELLOW LED is ON.
If the YELLOW LED is not ON solid, disconnect the 6-Pin Main connector and go back to step 1.

Insert the required remaining connectors.

Turn the key to the
Ignition ON/RUN position.
↪ The BLUE LED will flash rapidly ten (x10) times.
CAN Network programmed.
Wait
↪ When the RED and the YELLOW LED will turn ON: Turn the key to the OFF position.

Turn the key to the OFF position.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

PROGRAM.: 2 VEHICULE WITHOUT PATS DATA WIRE

| Press and hold the
programming button: Insert the 6-Pin Main connector.
↪ The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
---|---
| Release the programming button when the BLUE LED is ON. If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
| Insert the required remaining connectors.
| Turn the Ignition to the ON/RUN position.
↪ The BLUE LED will flash rapidly.
| Turn the Ignition to the OFF position.
↪ The BLUE LED will turn off.

The module is now programmed.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| |
---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter
remote or the OEM remote.
| |
Insert and Turn the key to the Ignition ON/RUN position.| Press
the brake pedal.| The vehicle can now be put in to gear and driven.

Module label
www.fortinbypass.com

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.
REV.: 20211102
GUIDE # 18511

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>