FORTIN 97261 Kia Rio 5 2009 Regular Key Remote Starters And Alarm Systems Installation Guide

GUIDE # 97261
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

97261 Kia Rio 5 2009 Regular Key Remote Starters And Alarm Systems

KIA
Rio| 2005-2011
Rio 5| 2008-2011

Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

DESCRIPTION

WIRING CONNECTION

PROGRAMMING PROCEDURE

| Press and hold the programming button:
Connect the 4-PIN Data-link harness (Black connector).
---|---
| Release the programming button when the YELLOW LED is ON.
If the LED is not solid YELLOW, disconnect the 4-Pin connector (Data-Link) and go back to step 1.
| Insert the required remaining connectors.
| Turn the key to the Ignition ON/RUN position.
↪When the YELLOW LED turn OFF:
Wait
↪ When the RED LED turn ON:
Turn the key to the OFF position.
| This process may take up to 5 minutes
Turn the key to the Ignition ON/RUN position.
↪ The RED LED is ON
↪ The YELLOW LED turn
ON: programming process started.
↪ The LED slowly alternate
between the RED and YELLOW LED’s:
processing…
↪ When the RED LED turn OFF and YELLOW LED begins to flash rapidly: The key bypass is programmed.
This process may take up to 7 minutes
| Turn the key to the OFF position.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

DIAGNOSTIC

www.fortinbypass.com

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2015, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
This guide may change without notice. See www.fortin.ca for latest version.

TECH SUPPORT
Tel: 514-255-HELP (4357)
1-877-336-7797
**![FORTIN 97261 Kia Rio 5 2009 Regular Key Remote Starters And Alarm Systems

• Symbol 2](https://manuals.plus/wp-content/uploads/2023/09/FORTIN-97261-Kia- Rio-5-2009-Regular-Key-Remote-Starters-And-Alarm-Systems-Symbol-2.jpg)ADDENDUM GUIDE
  www.fortinbypass.com
  WEB UPDATE
  REV.: 20211025
  **

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>