FORTIN Kia Sportage 2020 Standard-Key Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

Kia Sportage 2020 Standard-Key Remote Starters and Alarm Systems

Vehicle functions supported in this diagram (functional if equipped)
KIA
Sportage
2020-2022

BYPASS
FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT
76.[60] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately. Program bypass option IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program bypass option:

Program remote starter option for R.S.
OEM REMOTE STAND ALONE:

Press 3x Lock to remote start with the OEM remote.

Parts required (Not included) 1X relay

MANDATORY INSTALL

*HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

SECURITY STICKER
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Insert the 6-Pin Main connector.
   The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

2. Release the programming button when the LED is RED.
   If the LED is not solid RED disconnect the 6 Pin connector (Main-Harness) and go back to step 1.

3. Insert the required remaining connectors.

4. Press and release the programming button 6 times  (6x).
   The RED LED will flash 5 times and pause.

5. Turn the Ignition to the ON/RUN position.
   The RED LED will flash rapidly 10x times.
   Key bypass programmed.
   The BLUE LED will flash rapidly.
   CAN-Bus programmed.

6. Turn the Ignition to the OFF position.
   The BLUE LED will turn off.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

PROGRAM.: 2 VEHICULE WITHOUT EMS COM WIRE

1. Press and hold the programming button:
   Insert the 6-Pin Main connector.
   The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

2. Release the programming button when the BLUE LED is ON.
   If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the Ignition to the ON/RUN position.
   The BLUE LED will flash rapidly.

5. Turn the Ignition to the OFF position.
   The BLUE LED will turn off.

The module is now programmed.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| | | | |
---|---|---|---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter remote or the OEM remote.| Insert and Turn the key to the
Ignition ON/RUN position.| Press the brake pedal.| The vehicle can now be put in to gear and driven.

www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE REV.: 20211102
GUIDE # 87141

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>