FORTIN 102751 2012 Chevrolet Caprice Regular Key Remote Starters and Alarm Systems Installation Guide

FORTIN 102751 2012 Chevrolet Caprice Regular Key Remote Starters and

Alarm Systems

Product Information

• Product Name: Immobilizer Bypass
• Model: Contournement d’immobilisateur

Compatible Vehicles: Chevrolet Caprice (2011-2013)

Product Features:

• Lock/Unlock
• Arm/Disarm
• Trunk (open)
• Tachometer
• Heated Seats
• Door Status
• Trunk Status
• Hood Status
• Hand-Brake Status
• Foot-Brake Status
• PK3, Passlock OEM Remote monitoring

Product Usage Instructions

To program the bypass option, follow the steps below:

1. Obtain the firmware version and options by using the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
2. Add the firmware version and options using the tool.

If the vehicle is not equipped with a functional hood pin:

Step 1:

• A11: Hood trigger (Output Status) – Set to OFF (NON)

Note: If the vehicle can be remotely started with the hood open, set function A11 to OFF and install the hood pin switch(included).

Security Sticker:

This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.

Wiring Connections:

Refer to the wiring diagram on page 3 of the user manual for detailed instructions on connecting the module to the vehicle’s ignition, transponder, parking lights, and other components.

Automatic Transmission Mode:

Cut the loop for automatic transmission mode as indicated in the user manual.

Important:

Please refer to the user manual for detailed instructions and diagrams specific to your vehicle model and year.

REGULAR INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

UNIT OPTION OPTION UNITE/DESCRIPTION

• C1: OEM Remote status (Lock/Unlock) monitoring

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

• A11 OFF/NON: Hood trigger (Output Status).

MANDATORY INSTALL

• HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF. A11 OFF /NON

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press and hold the programming button: Connect the 6-PIN Main harness White connector).  The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
2. Release the programming button when the LED is BLUE.
3. If the LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
4. Insert the required remaining connectors.
5. Turn the key to the Ignition ON/RUN position. The BLUE LED will flash rapidly.
6. Press and release the programming button once (1x).  The Blue LED will turn OFF.The YELLOW and RED LEDS will alternate
7. Turn the key to the  OFF position.
8. Disconnect all connectors and after the 6-pin (Main-Harness) or the 4-pin Data-link connector. KEY BYPASS PROGRAMMING PROCEDURE 2/2
9. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu. Parts required (not included)
10. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-pin (Main- Harness) or the 4-pin (Data-Link) connector and after all the remaining connectors.

REMOTE STARTER / ALARM VERIFICATION PROCEDURE

REMOTE STARTER PROGRAMMING PROCEDURE

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

• Tél: 514-255-HELP (4357)
• 1-877-336-7797
• www.fortinbypass.com.
• This guide may change without notice. See www.fortin.ca for the latest version

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>