FORTIN 2009 Mitsubishi Outlander Fast Keyless Remote Starters and Alarm Systems Installation Guide

FORTIN 2009 Mitsubishi Outlander Fast Keyless Remote Starters and Alarm

Systems

Product Information

• Product Name: Immobilizer bypass
• Functions: Lock, Unlock, Arm, Disarm, Parking Light, Trunk (open), Tachometer, Door Status, Trunk Status, Hood Status, Hand-Brake Status, Foot-Brake Status, OEM Remote monitoring
• Compatible Vehicles: Mitsubishi Outlander 2007-2013 (Fast-Key 2008-2013)
• Firmware Version: 86.[06]
• Minimum Requirement: FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately) to add firmware version and options

Product Usage Instructions

1. To add the firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

2. Program bypass option if the vehicle is not equipped with a functional hood pin
   Set UNIT OPTION to A11 OFF if the vehicle can be remote started with the hood open.
   Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
   THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

3. Connect the product as follows: – (+) IGNITION: Fast-Key Only/Seulement – (+) TUMBLER SENSE – (+) START – (~) CAN LOW – (~) CAN HIGH – (+) 12V – (+) TURN SIGNAL RIGHT – (+) TURN SIGNAL LEFT – (-) HOOD IN RS8 – (-) HAND BRAKE IN RS9 – (-) TRUNK RELEASE OUT RS11 – (+/-) TACHOMETER IN RS12 – (+) FOOT BRAKE IN RS13 – (-) GROUND OUT WHILE RUNNING OUT RS14 – (-) TRUNK IN RS15 – (-) DOOR IN RS16 – (-) UNLOCK OUT RS17 – (-) LOCK OUT RS18

4. If using data-link, always connect RS7 OUT and the required connections.

5. If not using data-link, direct connections can be made.

6. Replace the Remote-Starter fuse with a 15A (MAX) fuse.
   Note: Refer to the user manual for more detailed instructions and diagrams for the specific vehicle model and installation requirements.

REGULAR INSTALLATION

**MANDATORY INSTALL

• HOOD PIN
  HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

PARTS REQUIRED (NOT INCLUDED)
1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

1x FLASH LINK MOBILE
1x FLASH LINK MOBILE APP
Smartphone AndroId or iOS with Internet connection (provider charges may apply).

1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector). The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

2. Release the programming button when the Blue LED is ON.
   If the LED are not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.

3. Connect the required remaining harnesses

4. Turn the key to the Ignition ON/RUN position.

5. The BLUE LED will flash rapidly.

6. Turn the key to the OFF position.

7. The BLUE LED turn off.

8. The RED and YELLOW LEDs will alternated.

9. Disconnect all the connectors and after the Data-Link (4-pins) connector

10. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu
    *Parts required (not included)

11. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with the remote-starter remote or the OEM remote.
• Insert and Turn the key to the Ignition ON/RUN position.
• Press the brake pedal.
• The vehicle can now be put in to gear and driven.

FAST-KEY : REMOTE STARTER FUNCTIONNALITY

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>