FORTIN 91521 2021 Toyota Corolla Push Button Remote Starters and Alarm Systems Installation Guide

REV.: 20211110
GUIDE # 91521
THAR-TOY13 THARNESS INSTALLATION
INSTALLATION HARNAIS THAR-TOY13
ADDENDUM – SUGGESTED WIRING CONFIGURATION

91521 2021 Toyota Corolla Push Button Remote Starters and Alarm Systems

Vehicle functions supported in this diagram (functional if equipped)

| COMPATIBLE MODULE REQIRED:| QR CODE ON THE LABEL| FIRMWARE VERSION
VERSION LOGICIELLE
79.[66] TOYOTA/ LEXUS MINIMUM| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---|---|---
| Program bypass option:
---|---
UNIT OPTION| DESCRIPTION
---|---
C1| OEM Remote status (Lock/Unlock) monitoring
D6| Push-to-Start
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| | Hood trigger (Output Status).
---|---|---|---
| Program remote starter option:
---|---
Program remote starter option for RS:|
FUNCTION| MODE| DESCRIPTION
---|---|---
34| 3| Trunk output : Unlock before trunk pulse 0.5 sec
38| 2| Enable Press 3x Lock to remote start with the OEM remote.

NOTES
NO KEY TAKEOVER
**The vehicles OEM remote and SmartKey are still operable during remote start.

MANDATORY INSTALL

* HOOD PIN HOOD STATUS:| | THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
---|---|---
A11|
---|---

SECURITY STICKER
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

THARNESS DIAGRAM

AUTOMATIC TRANSMISSION
TRANSMISSION AUTOMATIQUE| 1x THAR-TOY13| 1x THAR-TOY13
---|---|---
MANUAL TRANSMISSION
TRANSMISSION MANUEL| 1x THAR-TOY13| 1x THAR-TOY13

THAR-TOY13 | WIRING CONNECTION AUTOMATIC TRANSMISSION

THAR-TOY13 | WIRING CONNECTION MANUAL TRANSMISSION

DCRYPTOR PROGRAMMING PROCEDURE

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

| Press and hold the
programming button: Connect the 4-PIN Data-link harness (Black connector).
 The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
---|---
| Release the programming button when the LED is BLUE.
Release the programming button when the BLUE LED is ON.
| Insert the required remaining connectors.
|
|
| Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
| Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
Parts required (not included)
| Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.Parts required (not included)
| AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.
The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION
REMOTE STARTER / ALARM VERIFICATION
Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>