FORTIN 99691 Volkswagen Jetta Remote Starters Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 99691 Volkswagen Jetta Remote Starters
Vehicle functions
- Vehicle functions supported in this diagram
Parts required (Not included)
- 1x Vehicle Key
- 1x Fuse
- 1x Relay
- 2x Diodes 1A
NOTES
- 1 KEY REQUIRED FOR THE INSTALLATION
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
MANUAL TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
- Press and hold the programming button: Connect the 4-Pin Data-link connector.
- The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
- Release the programming button when the LED is BLUE.
- If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
- Insert the required remaining connectors.
- Press the Push-to-Start button to turn ON the ignition.
- Press and release the programming button once (1x).The BLUE LED will turn off.
- Wait,
- The BLUE LED will flash rapidly.
- Press the Push-to-Start button once to turn off the ignition.
- The BLUE LED will turn off.
The module is now programmed.
REMOTE STARTER FUNCTIONALITY
- All doors must be closed.
- Remote start the vehicle.
- Unlock the doors with either:
- The OEM remote
- The remote-starter remote or
- The door handle
- Enter the vehicle with the Intelligent SmartKey.
- The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
Module label
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT
PENDING
This guide may change without notice. See www.fortin.ca for latest version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>