FORTIN 103211 2007 Chrysler Sebring Convertible Remote Starters And Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
- FORTIN 103211 2007 Chrysler Sebring Convertible Remote Starters And Alarm
- Product Information
- Product Usage Instructions
- Vehicle functions
- NOTES
- WIRING CONNECTION WITH DATA-LINK
- WIRING CONNECTION WITHOUT DATA-LINK
- PROGRAMMING PROCEDURE
- REMOTE STARTER FUNCTIONALITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN 103211 2007 Chrysler Sebring Convertible Remote Starters And Alarm
Systems
Product Information
- Product Name: Immobilizer Bypass
- Compatible Vehicles: Chrysler Sebring Sedan and Convertible (2007)
- Firmware Version: 74.[39]
- Unit Option: A11 (Hood trigger – Output Status)
- Description: The Immobilizer Bypass is a device that allows you to bypass the immobilizer system in your Chrysler Sebring Sedan and Convertible (2007) to perform functions such as lock/unlock, arm/disarm, tachometer monitoring, door status, trunk status, hand-brake status, foot-brake status, and OEM remote monitoring.
Product Usage Instructions
-
1. Before installing the Immobilizer Bypass, make sure your vehicle is not equipped with a functional hood pin. If it is, program the bypass option by using the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
- If you do not have a data-link in your vehicle, use the THARNESS THAR-CHR5 without data-link. If you have a data-link, use the THARNESS THAR-CHR5 with data-link. Both options require a 7.5 Amp. fuse.
- The installation of the hood pin switch is mandatory. If your vehicle can be remote started with the hood open, set the function A11 to OFF.
- Connect the wiring as follows:
* A15 (-) HOOD IN RS8
* A14 (-) HAND BRAKE IN RS9
* REMOTE RS7 OUT STARTER (+) A9
* A13 (-) TRUNK RELEASE OUT RS11
* STARTER A12 (+/-) TACHOMETER IN RS12
* A11 (+) FOOT BRAKE IN RS13
* A8 (-) GROUND OUT WHILE RUNNING OUT RS14
* RS6 IN/OUT IGNITION (+)
* RS4 OUT PARKING LIGHTS (+)
* A5 (-) TRUNK IN RS15
* A4 (-) DOOR IN RS16
* RS2 IN 12V BATTERY (+)
* A3 (-) UNLOCK OUT RS17
* RS1 Ground | Masse (-)
* A2 (-) LOCK OUT RS18
Note: Always refer to the wiring connection guide for detailed instructions.
Vehicle functions
NOTES
- NOTES 12V BATTERY
ATTENTION THE T-HARNESS CURRENT IS LIMITED AT 10 AMP MAXIMUM.
If a parking lights (+) wire is use : that require more than 10Amp. Connect the remote-starter’s power directly to the vehicles battery with the appropriate fuse. Some remote starters can not be powered through Data-Link. In these cases connect the remote starter’s fused 12V power wire directly to the T-Harness.
WIRING CONNECTION WITH DATA-LINK
THAR-CHR5
WIRING CONNECTION WITHOUT DATA-LINK
PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>