FORTIN 96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems
ONLY COMPATIBLE WITH AUTOMATIC
TRANSMISSION VEHICLES.
Vehicle functions supported in this diagram (functional if equipped)
FORD
F-150| Key 2015-2019
F-250| Key 2017-2019
F-350| Key 2017-2019
F-450| Key 2017-2019
F-550| Key 2017
•| Immobilizer bypass
•| Lock
•| Unlock
•| Arm
•| Disarm
•| RAP Disable
•| Parking Lights
•| Tachometer
•| Heated seats
•| Heated Mirrors
•| Rear desfrost
•| Door Status
•| Trunk Status
•| Hood Status*
•| Hand-Brake Status
•| Foot-Brake Status
•| Active OEM Remote Start
FIRMWARE VERSION
4.01
ONLY – SEULEMENT
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately. Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
UNIT OPTION | DESCRIPTION |
---|---|
A11 |
Program bypass option:
UNIT OPTION | DESCRIPTION |
---|---|
C1 | OEM Remote status (Lock/Unlock) monitoring |
Parts required (Not included)
1x 7.5Amp. Fuse
The vehicle must be equiped with the OEM remote with the door locks.
MANDATORY INSTALL
* HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
A11|
---|---
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
-
Press and hold Insert the programming button:
Inster the 4-Pin (Data-Link) connector.
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate. -
Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1. -
Insert the required remaining connectors.
-
Turn the key to the Ignition ON/RUN position.
The BLUE LED will flash rapidly. -
Turn the key to the OFF position.
The BLUE LED will turn off. -
Turn the key to the Ignition ON/RUN position.
The YELLOW LED will turn ON. -
Wait 5 seconds.
-
Turn the key to the OFF position.
The module is now programmed.
REMOTE STARTER FUNCTIONALITY
| | | | |
---|---|---|---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with
the remote-starter remote or the OEM remote.| Insert and Turn the key to the
Ignition ON/RUN position.| Press the brake pedal.| The vehicle can now be put
in to
gear and driven.
www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>