FORTIN 81851 2013 Kia Soul Push Button Remote Starters And Alarm Systems Installation Guide

REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

81851 2013 Kia Soul Push Button Remote Starters And Alarm Systems

KIA
Soul Push-to-Start
2012-2013
Vehicle functions supported in this diagram (functional if equipped)

BYPASS FIRMWARE VERSION
76.31
ONLY – SEULEMENT
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program bypass option:

Parts required (Not included)
2X 1 AMP Diodes
NOTES
The vehicles OEM remote will not be operable during remote start.

MANDATORY INSTALL

*HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Insert the 6-Pin Main connector.
   The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

2. Release the programming button when the BLUE LED is ON.
   If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.

3. Insert the required remaining connectors.

4. Do not press the brake pedal.
   Press the Push-to-Start button twice to turn on the ignition.
   The BLUE LED will flash rapidly.

5. Press the Push-to-Start button once to turn off the ignition.
   The BLUE LED turn will off.

The module is now programmed.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONNALITY

| | | |
---|---|---|---|---
All doors must be closed.| Remote start the vehicle.| Press the Unlock button of the remote car starter.| Enter the vehicle with the Intelligent Access Key.| The vehicle can now be put in to gear and
driven.

If the vehicle is not unlocked the module will shut down the remotestarter and the vehicle as soon as any door is opened.

www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>