FORTIN 35021 2015 Subaru Outback Regular Key Remote Starters And Alarm Systems Installation Guide

GUIDE # 35021
REV.: 20211208
ADDENDUM – SUGGESTED WIRING CONFIGURATION
REGULAR INSTALLATION

35021 2015 Subaru Outback Regular Key Remote Starters And Alarm Systems

VEHICLE
YEARS
SUBARU
2015-2017

Vehicle functions supported in this diagram (functional if equipped)

UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---|---|---
MANUFACTURED AFTER2019

Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

NOTES

PLEASE MAKE SURE BATTERYVOLTAGE IS MINIMUM 12.44V OR BYPASS MODULE WILL NOTLEARN PROPERLY.

Parts required (Not included)
1X Relay
2X 1 AMP Diode

MANDATORY INSTALL

• HOOD PIN
  CONTACT DE CAPOT HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection

OR OU

| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. |Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
↳ The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED are BLUE & RED.
If the LED are not solid BLUE and RED disconnect the 4Pin connector (Data- Link) and go back to step 1.Insert the required remaining connectors.Press and release the programming button six time (6x).
↳ The RED and BLUE LED will flash 5 times each second.Start the engine.
↳ The RED LED will flash rapidly 10x times. Key bypass programmed.
↳Wait for the BLUE LED will flash rapidly.
↳Wait for the YELLOW and Wait for t RED LED will alternate.Turn the key to the OFF position.

KEY BYPASS PROGRAMMING PROCEDURE 2/2Disconnect all the connectors and after the Data-Link (4-pins) connector.Microsoft Windows Computer with Internet connection
Smartphone (Internet provider charges may apply)AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION/ PROCEDURE |
Test the remote starter. Remote start the vehicle.

Module label

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility  hatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE
This guide may change without notice. See www.fortin.ca for latest version.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>