FORTIN 96271 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20211202
GUIDE # 96271
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
96271 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems
| FIRMWARE VERSION
71.[44] FORD MINIMUM| To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---
| Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---|---|---
A11| | Hood trigger (Output Status).
| Program bypass option
(If equiped with OEM alarm):| UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock)
monitoring
| Parts required (Not included)| 1X 1 K Ohm Resistorode
---|---|---
| The vehicle must be equiped with the OEM remote with the door locks.
---|---
MANDATORY INSTALL
* HOOD PIN HOOD STATUS:| | THE HOOD PIN SWITCH MUST BE INSTALLED IF THE
VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
---|---|---
A11|
---|---
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
| Press and hold Insert the programming button: the 4-Pin (Data-Link)
connector.
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
---|---
| Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go
back to step 1.
| Insert the required remaining connectors.
| Turn the key to the Ignition ON/RUN position.
The BLUE LED will flash rapidly.
| The BLUE LED will turn off.
Turn the key to the OFF position.
| The YELLOW LED will turn ON.
Turn the key to the Ignition ON/RUN position.
| Wait 5 seconds.
| Turn the key to the OFF position.
| The module is now programmed.
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>