FORTIN 81971 2009 Toyota Rav4 Regular Key Remote Starters And Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 81971 2009 Toyota Rav4 Regular Key Remote Starters And Alarm Systems
Installation Guide
REGULAR INSTALLATION
Vehicle functions supported in this diagram (functional if equipped) | Functions
Immobilizer bypass
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately
Parts required (Not included)
1x fuse
DESCRIPTION
WIRING CONNECTION
PROGRAMMING PROCEDUR
Press and hold the programming button:
Reinsert the 4-Pin (Data Link) connector
Release the programming button when the LED is RED
If the LED is not sold RED disconnect the 4-Pin connector (Data Link) and go
back to step
Insert the required remaining connectors
Insert one functional key into the ignition barrel. DO NOT turn ON the key.
The RED LED will flash rapidly 10 times Key bypass programmed
If the LED is sold RED disconnect the 4-Pin connector (Data Link) and go back
to step1.
Remove the key from the ignition barrel.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the
supported features to ensure proper programming.
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUID
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>