FORTIN 103201 2007 Chrysler Sebring Convertible Remote Starters Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20211215
Guide # 103201
REGULAR & THAR-CHR5 INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
103201 2007 Chrysler Sebring Convertible Remote Starters
Vehicle functions supported in this diagram (functional if equipped)
| BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
71.[44] MINIMUM| To add the firmware version and the options, use the FLASH
LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---
| IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| | Hood
trigger (Output Status).
---|---|---|---|---
| Program remote
---|---
FUNCTION| MODE| DESCRIPTION
---|---|---
2| 2| Unlock Pulse Time : Single 1.5 sec
20| 2| Trunk output : Unlock before trunk pulse 0.5 sec
| Parts required (Not included)
1X 1K Ohm Resistorode
---|---
MANDATORY INSTALL
* HOOD
PIN
CONTACT
DE CAPOT| | HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.| | SECURITY
STICKER
---|---|---|---|---
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
WIRING CONNECTION
THAR-CHR5
KEY BYPASS PROGRAMMING PROCEDURE
| Press and hold the The Blue, Red, Yellow and
Blue & Red LEDs will alternatively illuminate. Connect
programming button: the 6-PIN Main harness (White connector).
---|---
| Release the programming button when the LED is BLUE.
If the LED is not solid BLUE the 6-Pin connector (Main-Harness) and go back to
step disconnect
| Insert the required remaining connectors.
| Turn the key to the Ignition ON/RUN position.
The BLUE LED will flash rapidly.
| Turn the key to the OFF position.
The BLUE LED will flash rapidly.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the
supported features to ensure proper programming.
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>