FORTIN 72801 EVO-ONE 2016 Key-Port Remote Starters and Alarm Systems Installation Guide

FORTIN 72801 EVO-ONE 2016 Key-Port Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION

YEARS ANNÉES| Vehicle functions supported in this diagram (functional if equipped)
---|---
Key Control| Lock| Unlock| Arm| Disarm| Tachometer| Trunk Release| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| OEM Remote monitoring
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
---|---|---|---|---|---|---|---|---|---|---|---|---|---
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2016| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •
2015-2017| •| •| •| •| •| •| •| •| •| •| •| •| •**

COMPATIBLE MODULE **REQUIRE

**

MODULE COMPATIBLE REQUIS:

NOTES

OEM Remote Monitoring
The vehicles OEM remote will remain functional when the vehicle is running, however, the intelligent access key will not unlock the doors when the vehicle is running

To complete the installation either use one of the existing keys or order a new valet key from Volkswagen, see next page for more information.

Parts required (Not included)

1x Vehicle Key
3x 1Amp Diode
1x Relay for key release

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

• HOOD NON PIN

**CONTACT DE CAPOT

**

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed

Program bypass option
**IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

**

Program bypass option:

Program bypass option (If equiped with OEM alarm):
 

Program remote starter option for R.S. OEM **REMOTE STAND ALONE:

DESCRIPTION

1. KEY PORT

2. UNDER STEERING COLUMN TWISTED PAIR

3. AT BRAKE SWITCH AU COMMUTATEUR DE FREIN’

4. ARNESS UNDER THE HOOD HARNAIS SOUS LE CAPOT

5. MANUAL TRANSMISSION: AT RELAY IN JUNCTION BOX

   • MAIN POWER  TRANSMISSION MANUELLE : AU RELAIS DE LA BOÎTE DE JONCTION – PUISSANCE PRINCIPALE
     

   • AUTOMATIC TRANSMISSION

   • TRANSMISSION AUTOMATIQUE

REMOVE THE PLASTIC PROTECTIVE CAP OVER THE KEY PORT TO SEE THE WIRE LOCATION. RETIREZ LE CAPUCHON DE PLASTIQUE PROTECTEUR SUR LE DESSUS DU CONNECTEUR POUR VOIR LA POSITION DES FILS

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press and hold the programming button : Connect the 6-PIN Main harness (White connector)

2. Release the programming button when the BLUE LED is ON

3. Insert the required remaining connectors

4. Insert the key into the key port and Press the key to turn ON the ignition.  (Do not press the brake pedal)
   

5. Press and release the programming button once (1x)

6. Wait, The BLUE LED will flash rapidly.
   

7. Press the key to shut off the ignition.

The BLUE LED will turn off.

KEY BYPASS PROGRAMMING PROCEDURE

Press and hold the programming button: Insert the 6-Pin Main connector:

1. Release the programming button when the BLUE LED is ON

2. Insert the required remaining connectors.
   

3. Do not press the brake pedal. Press the Push-to-Start button twice to turn on the ignition.

4. Press and release the programming button once (1x)

5. Wait :The BLUE LED will flash rapid

6. Press the Push-to-Start button once to turn off the ignition
   

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

  VEHICLE EQUIPPED WITH OEM ALARM

Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.

• Remote start

• Unlock the doors with either:

  • The OEM remote
  • The remote-starter remote

• Enter the vehicle with the Intelligent Smartly

• Insert  the key in the Key port

• The vehicle can now be put in to gear and driven

Vehicles with Push-to-Start.

• All doors must be closed.

• Remote start

• Unlock the doors with either:

  • The OEM remote
  • The remote-starter remote

• Enter the vehicle with the Intelligent Smartly

• The vehicle can now be put in to gear and driven

MADE IN CANADA © 2018 ALL RIGHTS RESERVED

Notice: Updated Firmware and Installation Guides Updated fi rewire and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case  is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT Tél: 514-255-HELP (4357)

ADDENDUM GUIDE

www.fortinbypass.com

WEB UPDATE

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>