FORTIN 34041 Acura RL 2006 Smart Key Remote Starters And Alarm Systems Installation Guide

: June 13, 2024
: FORTIN

Table of Contents

REGULAR INSTALLATION
WIRING CONNECTION
PROGRAMMING PROCEDURE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN logo1 FORTIN - EVO ALL 1 REV.: 20220112 GUIDE # 34041

REGULAR INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION

|

Vehicle functions supported in this diagram (functional if equipped)

---|---
| | | | | | | | | | | | |
VEHICLE| YEARS| Immobilizer Bypass| Lock| Unlock| Arm| Disarm| Tachometer| Trunk Release| Foot-Brake Status| Door Status| Hood Status*| Truink Status| Hand-Brake Status| Parking Lights
ACURA
RL smart key| 2005-2010|

•

| •| •| •| •| •| •| •| •| •| •| •|

•

|

FIRMWARE VERSION

73.[38]

HONDA/ACURA MINIMUM

| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---
|

Program bypass option:

|

UNIT OPTION

| DESCRIPTION
---|---|---|---

C1

| OEM Remote status (Lock/Unlock) monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| | Hood trigger (Output Status).
---|---|---|---
MANDATORY INSTALL

* HOOD PIN

CONTACT

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

| A11|

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

WIRING CONNECTION

FORTIN 34041 Acura - WIRING CONNECTION

Back view – Green 21-pin connector, fuse box.
Back view – White connector, driver kick panel, fuse box.
Back view – Keyless access indicator: 12-pins Grey connector located behind the electric mirror switch at left of the steering wheel.
Immobiliser connector can be Green or White
Back view – transponder connector , 7-pins.
Back view – Brown 6-pin connector, Ignition Switch

PROGRAMMING PROCEDURE

[1]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 1

Press and hold the programming button: Insert the 4-Pin (Data-Link) connector.

The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

[2]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 2

Release the programming button when the Red LED is ON.

If the Red LED is not ON solid disconnect the 4-PIN Data-Link harness (Black connector) and go back to step 1.

[3]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 4

Insert the required remaining connectors.

[4]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 5

Press and release the programming button twice (2x).

The RED LED will flash once and pause.

[5]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 6

Turn the key to the Ignition ON/RUN position.

The Red LED will flash 10 times rapidly.
Key bypass programmed.

The Blue LED will flash rapidly.
CAN-Bus programmed.

[6]

FORTIN 34041 Acura - PROGRAMMING PROCEDURE 7

Turn the key to the OFF position.

The Blue LED will turn off.

The module is now programmed.
Use the remote of the remote starter / security system to test all the supported features and ensure all the features are properly programmed.

Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

FORTIN 34041 Acura - TECH SUPPORT TECH SUPPORT