FORTIN 67871 Cadillac XT6 2020 Push To Start Remote Starters And Alarm Systems Installation Guide

REV.: 20220111
Guide # 67871
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
70.[45] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option:

| UNIT OPTION| DESCRIPTION
---|---|---
| C1| OEM Remote status (Lock/Unlock)
monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11  | Hood trigger (Output Status).
| D6| Push-to-Start
ATTENTION!| E 5 | By default  DEACTIVATED
| | MANUFACTURED MODULES
| | FUNCTION| MODE| DESCRIPTION
---|---|---|---|---
| Program remote starter option for R.S. OEM REMOTE STAND ALONE:| 38| 2| Enable Press 3x Lock to remote start with the OEM remote.

MANDATORY INSTALL

• HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Parts required (Not included)
1X 1k Ohm Resistor

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

1. Remove the battery from the OEM remote.

2. Place the OEM remote into the transmitter pocket of the center console.

Refer to vehicule user guide for keyport location.

1. Press and hold the Insert programming button: the 6-Pin Main connector.
   ↳ The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
   

2. Release the programming button when the LED is YELLOW.
   If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
   

3. Insert the required remaining connectors.
   

4. Press and release the programming button five (5x) times.
   ↳ The YELLOW LED will flash 5 times each second.
   ↳ WAIT for the YELLOW LED to turn ON solide.
   

5. Open the driver door.

6. Press the foot-brake pedal.
   Press the Push-to-Start button until the engine start.
   Release the foot-brake pedal.
   ↳ The RED LED will turn ON.
   ↳ The YELLOW LED will turn OFF.
   
   KEY BYPASS PROGRAMMING PROCEDURE 2/2

7. Press the Push-to-Start button until the engine turn OFF.

8. Close and open the driver door.

9. Press the foot-brake pedal.
   Press the Push-to-Start button until the engine start.
   Release the foot-brake pedal.
   ↳ The BLUE LED will turn ON.
   ↳ The BLUE LED will turn OFFThe RED LED will turn OFF.
   ↳ The YELLOW LED will flash rapidly
   ↳ The BLUE LED will turn ON.
   ↳ The BLUE LED will flash rapidly
   

10. Press the Push-to-Start button until the engine turn OFF.
    ↳ The BLUE LED will flash slowly
    

11. Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
    

12. Microsoft Windows Computer with Internet connection
    Smartphone (Internet provider charges may apply)
    Ordinateur Microsoft Windows avec connection Internet
    Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
    Parts required (not included)
    KEY BYPASS PROGRAMMING PROCEDURE 3/3

13. AFTER DCRYPTOR PROGRAMMING COMPLETED
    Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.
    

The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE
MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| Enter the vehicle with the Intelligent Key.
| The vehicle can now be put in to gear and driven.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

www.fortinbypass.com
Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular  basis. We recommend that you update this module to the latest fi rmware anddownload the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
Made in Canada
www.fortinbypass.com
WEB UPDATE

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>