FORTIN 95001 2006 Chrysler PT Cruiser Regular Key Remote Starters and Alarm Systems Installation Guide

REGULAR & THAR-CHR5 INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

95001 2006 Chrysler PT Cruiser Regular Key Remote Starters and Alarm

Systems

CHRYSLER
2006-2010
Vehicle functions supported in this diagram (functional if equipped)

Stand Alone compatible

BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
74.[39] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option:

Program bypass option (If equiped with OEM alarm):

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program remote starter option:
Program remote starter option for R.S. OEM REMOTE STAND ALONE:

(+) Accessory (E2)
38| 2| Enable
Press 3x Lock to remote start with the OEM remote.

Parts required (Not included)
WIRE TO WIRE DIAGRAM
1x 7.5 Amp. fuse
THARNESS DIAGRAM
THARNESS THAR-CHR5
1x THAR-CHR

MANDATORY INSTALL

*HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

| OFF
NON
---|---

SECURITY STICKER
WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

WIRING CONNECTION

THAR-CHR5
WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Connect  the 6-PIN Main harness (White connector).
   The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

2. Release the programming button when the LED is BLUE.
   If the LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the Ignition ON/RUN position.
   The BLUE LED will flash rapidly.

5. Turn the key to the OFF position.
   The BLUE LED will flash rapidly.

6. With OEM remote Press the LOCK button on the vehicles OEM remote.
   Or
   Without OEM remote Press and release the programming button on the once.

The BLUE LED will turn off.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| | | | |
---|---|---|---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter remote or the OEM remote.| Insert and Turn the key to the
Ignition ON/RUN position.| Press the brake pedal.| The vehicle can now be put in to gear and driven.

www.fortinbypass.com
Module label

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

References

• The domain name off.la is for sale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>