FORTIN 90511 Infiniti QX4 2002 Standard Key Remote Starters and Alarm Systems Installation Guide

FORTIN 90511 Infiniti QX4 2002 Standard Key Remote Starters and Alarm

Systems

Product Information

Product Usage Instructions

To add the firmware version and options to the module, you will need to use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, which are sold separately.

Vehicle functions

BYPASS FIRMWARE

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT

• 72.[48]
• To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

UNIT OPTION OPTION UNITE/DESCRIPTION

• A1/OFF NON/
  • If vehicle equipped with OEM alarm

Program remote starter option:

FUNCTION/MODE/DESCRIPTION

• 20/2/Tachless only. ( vehicles with automatic transmission only)
• 2/3//(+) Start 2 (E1)
• 32/3/DK.Blue (GWR) Shut Down After

Parts required (Not included)

• 1x Relay (Hatch Glass Release)

MANDATORY INSTALL

• HOOD PIN
• HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN.

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential securityelements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

WIRING CONNECTION

KEY BYPASS PROGRAMMING

REMOTE STARTER PROGRAMMING

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

VEHICLE EQUIPPED WITH OEM ALARM

Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module willautomatically UNLOCK before remote start and LOCK after the vehicle has remote started.

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

• Tél: 514-255-HELP (4357) 1-877-336-7797
• www.fortinbypass.com.
• REV.: 20211124
• Guide # 90511
• This guide may change without notice. See www.fortin.ca. for latest version.
• INTERFACE MODULE
• Made in Canada
• PATENTS PENDING US: 2007-228827-A1
• www.fortinbypass.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>