FORTIN 69951 2018 Volkswagen Atlas Regular Key Remote Starters And Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 69951 2018 Volkswagen Atlas Regular Key Remote Starters And Alarm
Systems 
Product Information
- Product Name: Volkswagen Atlas 2018
- Firmware Version: 61.[12]
- Unit Option: D2
Description
The Volkswagen Atlas 2018 is a vehicle equipped with various features and
functions. It has key control, lock/unlock, arm/disarm, tachometer, trunk
open, door status, trunk status, hood status, hand-brake status, foot-brake
status, and OEM remote monitoring capabilities.
Installation Requirements
- The installation of safety elements is mandatory.
- The hood pin switch must be installed for proper hood status functionality.
- This module must be installed by a qualified technician to avoid any permanent damage to the vehicle.
- A key is required for the installation process.
Wiring Connection:
Please refer to the user manual for detailed wiring connection
instructions.
Firmware Update:
To add the firmware version and options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool sold separately.
Note: The installation of safety elements such as the hood pin switch is essential for proper functionality and security.
Product Usage Instructions
-
Key Control:
- Use the key to lock or unlock the vehicle.
-
Arm/Disarm:
- Arm or disarm the vehicle’s security system using the appropriate controls.
-
Tachometer:
- Monitor the engine’s RPM (revolutions per minute) using the tachometer.
-
Trunk Status:
- Check the status of the trunk, whether it is open or closed.
-
Door Status:
- Check the status of the doors, whether they are open or closed.
-
Hood Status:
- Ensure that the hood pin switch is properly installed for accurate hood status monitoring.
-
Hand-Brake Status:
- Check the status of the hand-brake, whether it is engaged or released.
-
Foot-Brake Status:
- Check the status of the foot-brake, whether it is engaged or released.
-
OEM Remote Monitoring:
- Use the OEM remote monitoring feature to remotely monitor the vehicle.
Vehicle functions supported in this diagram (functional if equipped)
VEHICLE
| YEARS| Key Control| Lock| Unlock| Arm| Disarm| Tachometer| Trunk – open|
Door Status| Trunk Status| Hood Status| Hand-Brake Status| Foot-Brake Status|
OEM Remote monitoring
VOLKSWAGEN| 2018| | | | | | | | | | | | |
Atlas| 2018| •| •| •| •| •| •| •| •|
•| •| •| •| •
FIRMWARE VERSION VERSION LOGICIELLE| To add the firmware version and the
options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE
- tool,
- sold separately.
---|---
**| [ 12 ]
61.[12] VW MINIMUM| MINIMUM**
|
Program bypass option ( If equipped with OEM alarm ):
| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
D2| Unlock before / Lock after (Disarm OEM alarm)
Unlock before / Lock after (Disarm OEM alarm)
Parts required
(Not included)
- 1x Vehicle Key
NOTES
- 1 KEY REQUIRED FOR THE INSTALLATION
- The vehicle’s OEM remote will operate while the engine is running.
MANDATORY INSTALL
HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF. Notice : the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE
DESCRIPTION
WIRING CONNECTION
PROGRAMMING PROCEDURE
- Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
- The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
- Release the programming button when the LED is BLUE.
- If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
- Insert the required remaining connectors.
- Turn the key to the Ignition ON/RUN position.
- The BLUE LED will flash rapidly.
- Turn the key to the OFF position.
- The BLUE LED will turn off.
The module is now programmed.
Notice : Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING:
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tel : 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com
WEB UPDATE
Documents / Resources
|
FORTIN 69951 2018 Volkswagen Atlas Regular Key Remote Starters And Alarm
Systems
[pdf] Installation Guide
69951 2018 Volkswagen Atlas Regular Key Remote Starters And Alarm Systems,
69951, 2018 Volkswagen Atlas Regular Key Remote Starters And Alarm Systems,
Regular Key Remote Starters And Alarm Systems, Remote Starters And Alarm
Systems, Starters And Alarm Systems
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>