Acoustic Audio AA40CB 3 Way Speaker User Manual

Acoustic Audio AA40CB 3-Way Speaker

Introduction

In a market brimming with audio devices, Acoustic Audio by Goldwood steps ahead with their AA40CB 3-Way Speaker. Offering not just exceptional sound but also a stylish look, this speaker guarantees to become the centerpiece of any room. The Acoustic AudioAA40CB 3-Way Speaker is not just another addition to the home audio range but a product designed with precision, ensuring quality sound, longevity, and style. Whether you wish to enhance your home theater experience or simply enjoy rich sound in any room, this speaker is bound to exceed expectations.

Product Specifications

• Brand: Acoustic Audio by Goldwood
• Model Name: Indoor Center 3 Way Speaker 500 Watts Black Bookshelf
• Speaker Type: Surround
• Connectivity Technology: Auxiliary
• Recommended Uses: Indoor
• Power Handling:
• Maximum: 500 watts
• RMS: 250 watts
• Frequency Response: 94Hz-20 kHz
• Sensitivity: 94dB at 8ohm
• Drivers:
• Woofers: Dual 4″ Polypropylene
• Tweeter: 1″ soft dome
• Cabinet: Black ABS sealed
• Connectors: Spring-loaded raw wire
• Product Dimensions (H x W x D): 5.75″ x 15.625″ x 5.75″
• Item Weight: 5.33 pounds

System Requirements

• Amplifier or receiver with raw speaker wire outputs
• Power output from amp: 20 – 250 watts per channel
• CL3 or raw speaker wire for connection

Additional Information

• The speaker is designed to be versatile, making it a fit for both surround sound home theater systems and as an individual speaker on a bookshelf.
• It can also be utilized in moisture-prone environments like bathrooms and kitchens, thanks to its durable design.
• The compact size ensures a big sound experience without taking up too much space.

Product Features

• Traditional Passive Design: The AA40CB 3-Way Speaker operates as a traditional passive speaker, meaning it requires power from an external amplifier or receiver.
• High-Quality Sound: Equipped with a full-range 2-way sound coverage system. Dual 4″ polypropylene woofers ensure robust low frequencies, while the 1″ soft dome tweeter handles crisp high frequencies.
• Powerful Handling: The speaker can manage a whopping 500 watts of power, with a consistent 250W RMS, ensuring clear sound even at high volumes.
• Durable Construction: Built with a black ABS-sealed cabinet, this speaker is designed for longevity and resilience.
• Compact Yet Powerful: Despite its relatively compact dimensions of 5.75″ x 15.625″ x 5.75″, the AA40CB 3-Way Speaker delivers a rich and expansive soundstage.
• Versatile Placement: Its size and design allow it to fit seamlessly onto any bookshelf or in any room. It can also be incorporated into larger home theater systems or used as a standalone unit with a stereo system.
• Spring-Loaded Connectors: Features raw wire connectors that are spring-loaded, making connection to an amplifier or receiver straightforward and efficient.
• Indoor Versatility: While it is primarily an indoor speaker, its robust design makes it suitable for moist environments like bathrooms and kitchens.
• Optimal Frequency Response: With a frequency response ranging from 94Hz-20 kHz, it covers a broad spectrum of sound, from deep bass to clear highs.
• High Sensitivity: At 94dB at 8ohm, it can provide a loud output even with minimal power input.
• Simple Setup: With the included instruction manual, setting up your Acoustic Audio AA40CB 3-Way Speakerspeaker is a breeze.
• Stylish Design: Its sleek black design ensures it not only sounds good but looks good in any setting, be it a modern living room or a classic study.

In summary, the Acoustic Audio AA40CB 3-Way SpeakerHome Theater Speaker by Goldwood is designed to offer a blend of power, clarity, and style, making it a top choice for audiophiles and casual listeners alike. Whether you’re looking to enhance your home theater system or simply need a reliable speaker for your living room, the AA40CB 3-Way Speaker is up to the task.

Mounting Instructions

What You’ll Need

• A sturdy shelf or speaker stand
• Speaker wire
• Wire strippers
• A ruler or measuring tape
• A level
• A pencil or marker
• Optionally, rubber pads or isolation feet

Steps

1. Location Selection:
   • Choose a location that’s central to your listening area. For best sound quality, the speaker should be at ear level when seated.
   • Keep the speaker away from corners to prevent sound reflection and potential distortion.
2. Measure & Mark:
   • If using a shelf, ensure it’s level and can support the weight of the speaker (5.33 pounds).
   • Mark the exact location where you plan to place the speaker.
3. Preparation of Speaker Wire:
   • Measure the distance from the speaker’s location to the amplifier or receiver.
   • Using wire strippers, strip about 1/2 inch of insulation from each end of the speaker wire to expose the bare wire.
4. Connection:
   • The Acoustic Audio AA40CB 3-Way Speaker comes with spring-loaded raw wire connectors. Press down on the spring clip, insert the stripped end of the wire ensuring that red goes to red (+) and black goes to black (-), then release the spring clip to secure the wire.
   • Connect the other ends of the speaker wires to the corresponding terminals on your amplifier or receiver, maintaining the same polarity.
5. Placement:
   • Place the speaker carefully on the shelf or stand. Ensure it’s stable and won’t easily be knocked over.
   • Optionally, you can add rubber pads or isolation feet under the speaker to reduce vibrations and improve sound quality.
6. Positioning:
   • Angle the speaker towards the main listening area. This will ensure the sound directly reaches the listener, providing the best audio experience.
7. Test:
   • Power on your system and play some audio. Adjust the speaker’s position if necessary to get the desired sound quality.

Safety Tips

• Do not place the speaker near any liquid or in a location where it might get wet.
• Ensure the speaker is stable and there’s no risk of it being knocked over, especially if children or pets are present.

By following these instructions, you should have your Acoustic Audio AA40CB 3-Way Speaker speaker mounted and ready to deliver a great audio experience.

Troubleshooting

Experiencing issues with your Acoustic Audio AA40CB 3-Way Speaker speaker? Here’s a handy troubleshooting guide to help you diagnose and address common problems.

No Sound

• Check the connections: Ensure that all cables are properly connected to the speaker and the amplifier or receiver.
• Test with another device: Connect the speaker to another device to determine if the problem is with the original device or the speaker.
• Volume Settings: Make sure the volume is turned up on both the speaker and the connected device.
• Check for Muted Sound: Ensure that the sound isn’t muted on the connected device.

Distorted Sound

• Volume Levels: High volume levels can sometimes cause distortion. Lower the volume to see if the distortion disappears.
• Check Connections: Loose connections can cause sound distortion. Ensure that all connections are secure.
• Replace the Cable: A damaged cable can cause distortion. Try using another cable to see if it resolves the issue.

Hissing or Static Noise

• Interference: Electronic devices can interfere with the speaker’s performance. Ensure that devices like routers, phones, or other electronic devices are placed away from the speaker.
• Faulty Cable: A damaged cable can introduce unwanted noise. Replace the cable to see if that resolves the issue.
• Check Source Quality: Poor quality audio files or streaming at low bit rates can introduce hiss or static. Try playing a high-quality audio file to see if the issue persists.

Uneven Sound Levels or One Side Not Working

• Balance Settings: Check the balance settings on your amplifier or receiver to ensure that they are set to the middle.
• Cable Connections: Ensure that both left and right channels are connected properly.
• Test with Another Source: Connect the speaker to another source to see if the problem persists.

Speaker Doesn’t Power On

• Remember, the Acoustic Audio AA40CB 3-Way Speaker is a passive speaker and doesn’t have a power switch. It derives power from the amplifier or receiver. Ensure your amplifier or receiver is powered on and functioning.

Vibrations or Rattling

• Speaker Placement: Ensure the speaker is placed on a stable, flat surface. Check if anything is placed on or touching the speaker that could cause vibrations.
• Check Internal Components: If you’re confident, you might want to open up the speaker to see if any internal components have come loose. However, this might void the warranty, so proceed with caution.

Overheating

• Adequate Ventilation: Ensure the speaker has enough ventilation. Do not place it in confined spaces or near heat sources.
• Lower the Volume: Continuously playing at high volumes can cause the speaker to overheat. Reduce the volume or give the speaker a break.

FAQs

Is the Acoustic Audio AA40CB 3-Way speaker wireless?

No, the Acoustic Audio AA40CB is a traditional passive speaker that requires a wired connection to your amplifier or receiver.

Can this speaker be wall-mounted?

The AA40CB is primarily designed as a bookshelf speaker. While it doesn't come with specific wall-mounting hardware, its compact size allows for flexible placement, including potential wall-mounting with appropriate brackets and hardware.

What type of amplifier or receiver is compatible with this speaker?

Any amplifier or receiver with raw speaker wire outputs can be used. Ensure the power from your amp is no less than 20 watts and no more than 250 watts per channel.

Can this speaker be used in a moisture-prone environment like a bathroom?

While the product description mentions its suitability for bathrooms, it's advisable to avoid exposing the speaker to excessive moisture. Ensure there's adequate ventilation if placing it in such areas.

Is this speaker sold as a pair or individually?

The Acoustic Audio AA40CB is sold individually, as per the provided data.

What is the speaker's frequency response?

The frequency response of the Acoustic Audio AA40CB is 94Hz-20 kHz.

How does the speaker connect to a device?

The speaker uses raw speaker wire connections, which can be attached to any compatible amplifier or receiver with similar outputs.

Can the speaker handle high volumes without distortion?

Yes, the speaker can handle up to 500 watts of power (250W RMS), ensuring powerful sound delivery without distortion when used within its recommended power range.

Are there any additional components needed for setup?

No additional components are strictly necessary for basic setup, but you'll need speaker wire to connect the speaker to your amplifier or receiver. Additionally, rubber pads or isolation feet might enhance sound quality by minimizing vibrations.

How do I clean or maintain the speaker's appearance?

Use a soft, damp cloth to gently wipe the speaker's surface. Avoid using abrasive materials or harsh chemicals that could damage its finish.

Can I use this speaker as a front, center, or rear channel in my home theater setup?

Yes, the AA40CB is versatile and can function as a center channel due to its design, but it can also be integrated as a front or rear channel depending on your home theater needs.

Can I use banana plugs with this speaker?

The AA40CB utilizes spring-loaded raw wire connectors. While banana plugs might fit, it's essential to ensure a secure connection and check compatibility.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>