MINKA LAVERY 4881-66A Coal Kaitlen 6 Wide Vantage Mini Pendant Installation Guide

MINKA LAVERY 4881-66A Coal Kaitlen 6 Wide Vantage Mini Pendant

PRODUCT INFORMATION

• Product Name: Item#4881-66A
• Product Type: Chain Hung Fixture
• Date of Manufacture: 02/02/2021
• Manufacturer: N/A

PRODUCT USAGE INSTRUCTION

1. Shut off the power at the fuse box or circuit breaker.
2. If necessary, remove the old fixture, including the mounting hardware.
3. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
4. Attach the mounting strap (A) to the outlet box using the provided screws.
5. Connect the fixture wires (Black or Smooth, White or Ribbed, Green or Bare Copper) to the corresponding house wires (Black (Hot), White (Neutral), Green (Ground)) using wire connectors.
6. If your outlet has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (L) using the green screw provided.
7. Tuck the wire connectors neatly into the ceiling outlet box.
8. Raise the canopy (S) all the way to the ceiling and secure it with finials (T).
9. Unscrew the socket ring (J) from the fixture socket (H), position the glass shade (I) onto the fixture, and secure it in place with the socket ring (H).

Note: It is important to use proper chain pliers (not included) to open and close the chain included with this fixture. Do not open them with other tools that may twist or stress the chain links. It is important to use proper chain pliers like the ones shown in the diagram.

HARDWARE BAG

• A. Mounting Strap*1
• B. Outlet Box Screws*2
• C. Chain Holder*1
• D. Canopy*1
• E. Lock Collar*1
• F. Chain*1
• G. Chain Loop*1
• W. Wire Connector*3

INSTALLATION INSTRUCTIONS

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the fuse box or circuit breaker. If necessary, remove the old fixture, including the mounting hardware.

2. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
   ASSEMBLING THE FIXTURE WITH CHAIN LOOP (Fig. 2)

3. Attach the mounting strap (A) to the outlet box using outlet box screws (B) (Size: #8-32N*L0.5”). The side of mounting strap (A) with “GND” marked must face out.

4. Twist the chain holder (C) into the nipple of the mounting strap (A) and adjust the length of the nipple.

5. Determine the desired hanging height and use a pair of proper chain pliers to remove and discard the excess chain.

6. Open one end of chain (F) and attach it to chain loop (G) and close the chain (F). Slip the lock collar (E) and canopy (D) over the chain (F) and allow them to rest on the fixture body. Open the other end of the chain (F) and attach it to the chain holder (C) and close the chain (F).

7. Carefully lace the fixture’s wires through the chain (F). Feed the fixture wires through the chain loop (G), lock collar (E) and canopy (D) assembly.
   CONNECTING THE WIRES (Fig.2)

8. At this point, connect the electrical wires as shown in Fig.2, making sure that all wire connectors (W) are secured. If your outlet has a ground wire (green or bare copper), connect the fixture’ ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting strap (A) using the green screw provided.

9. Tuck the wire connectors (W) neatly into the ceiling outlet box.
   FINISHING THE INSTALLATION (Fig.1)

10. Raise the canopy (D) all the way to the ceiling and fix the canopy (D) on the ceiling with lock collar (E).

11. Unscrew the socket ring (J) from the fixture socket (H). Position the glass shade (I) onto the fixture and secure in place with the socket ring (J).

12. Install (1) one medium base (E26) bulb (K) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification—DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

Your installation is now complete. Return power and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

CHAIN HUNG FIXTURE INSTRUCTION
Notice: It is important to use proper chain pliers (not included) To OPEN and CLOSE the chain included with this fixture. Do not open them with other tools that may twist or stress the chain links. It is important to use proper chain pliers like the ones shown in the diagram.

PREPARATION (Fig. 4 & Fig. 5)

1. Twist down the chain loop (G) which is used forchandelier. (Fig.5)

2. Cut down a length of wire if the wire is too long.

3. Thread canopy (S), metal washer (R), washer (Q), lock washer (P) and hex nut (O) into the nipple of the fixture (H). Then secure hex nut (O) by using wrench (not included). (Fig.4)

4. Attach the mounting plate (L) to the outlet box using outlet box screws (N) (Size: #8-32N*L0.5”). Then adjust the length of mounting screws (M) and tighten with hex nuts. The side of the mounting plate (L) marked “GND” must face out. (Fig.4)
   CONNECTING THE WIRES (Fig.2)

5. At this point, connect the electrical wires as shown in Fig.2, making sure that all wire connectors (W) are secured. If your outlet has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (L) using the green screw provided.

6. Tuck the wire connectors neatly into the ceiling outlet box.
   FINISHING THE INSTALLATION (Fig.4)

7. Raise the canopy (S) all the way to the ceiling. Place the canopy (S) through the mounting screws on the mounting plate (L) and fix it with finials (T).

8. Unscrew the socket ring (J) from the fixture socket (H). Position the glass shade (I) onto the fixture and secure in place with the socket ring (H).

9. Install (1) one medium base (E26) bulb (K) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification—DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

Your installation is now complete. Return power and test the fixture.
Note: Illustration (Fig.4) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>