Fysic FL-11 LED Reading Light Instruction Manual
- June 13, 2024
- Fysic
Table of Contents
Fysic FL-11 LED Reading Light
Product Information
The FL-11 is a portable charger designed for charging devices with a DC5V/1.0A input. It is manufactured by Fysic and its specifications are as follows:
- Manufacturer: Fysic
- Model: FL-11
- Input: DC5V/1.0A
- Website: www.fysic.com
- Version: V1.5
Product Usage Instructions
To use the FL-11 charger, please follow the steps below:
- Ensure that the charger is connected to a power source with a DC5V/1.0A output.
- Locate the charging port on your device and connect one end of the charging cable to it.
- Insert the other end of the charging cable into the USB port of the FL-11 charger.
- Once the connection is secure, the charging process will begin automatically.
- Wait for the device to fully charge. The charging time may vary depending on the device.
- After the device is fully charged, disconnect the charging cable from both the device and the FL-11 charger.
- Store the FL-11 charger in a safe and dry place when not in use.
If you have any further questions or need assistance, please refer to the user manual or contact Fysic customer support.
USING
POWER
CHARGE
Specification
- DC supply voltage: DC5V / 1A
- Working environment: -5~40°C
- LED type lamp: 6000-6500K, 0.2W
- LED quantity: 6 pcs
- LED life: ≥30000 hours
- High brightness: 100LM / ±390mA
- Mid brightness: 35LM / ±140mA
- Low brightness: 8LM / ±38mA
- Battery: Li-Po 3.7V 600mAh
- Adapter: excl.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>