Fysic FX3960 Alarm Vaste telefoon met User Manual

: June 4, 2024
: Fysic

Fysic FX3960 Alarm Vaste telefoon met User Manual

1. SPECIFICATIONS

Alarm button range – phone: 30 meters indoors 200 meters outdoors operating time with a full battery: 5 hours of phone calls 150 hours standby power supply charger: 6VDC, 450mA, alarm button power supply: Lithium-Ion battery model VT-02 3.7V / 450mAh

2 .DECLARATION OF CONFORMITY

The device complies with the essential requirements and facilities as described in the European directive 1999/5/EC. The declaration of conformity is available on the website WWW.FYSIC.COM

3. ABOUT THIS INSTRUCTIONS FOR USE

This manual only describes how to install of this Fysic FX3960 wireless alarm button and the functioning of it. For the functions of the FX3960 desk phone as well as general instructions such as maintenance, warnings and tips, etc., please refer to the separate user manual of the FX3960 desk phone.

4. INTENDED USE

This wireless alarm button can only be used in combination with the Fysic FX3960 fixed telephone. With this wireless alarm button, you can choose 2 numbers that are in the FX3960 landline telephone as direct memory number M1 and M2 are programmed. This wireless alarm button has no tone detection and no automatic repeat function. Choosing one of the 2 numbers and disconnection serves completely under the control of the user.

5 OVERVIEWS

5.1 INTRODUCTION: The Fysic FX3960 is a wireless alarm button that you can wear with the supplied clip on your belt or with the supplied neck cord around your neck. With this alarm button you can call the stored under M1 and M2 dial memory numbers and have a completely hands-free conversation. You can also accept incoming calls with this pendant.

6 INSTALLATION

6.1 ATTACH NECK CORD:

1. get the thin cord through the opening of the alarm button and make a loop of this cord 2. remove the thick part from the cord through the loop 3. pull out the thick part of the cord all the way through the loop and put it on something

6.2 CHARGING:

connect the supplied power adapter with connection DC-6V on the back of the charger and put the adapter in a 230V Wall outlet
place the alarm button according to the adjacent drawing the charger, the status indicator lights up red (*
as long as the status indicator light is red, the built-in battery is being charged; when this light turns green, the built-in
battery is fully charged and you can remove alarm button from charger

Always release the alarm button when using it for the first time at least 12 hours of continuous charging, even if it gives the indicator light shows that the batteries are full.

6.3 RIEMCLIP:

you can also put the alarm button in the belt clip with you to wear; push the alarm button slightly back and then down to click it in the belt clip; this prevents the alarm button from easily falls out of the belt clip

When this light turns yellow and you hear the announcement ‘Not registered’ when you press a key If you press the alarm button, the alarm button is not yet on the phone registered. To do this, first follow the instructions on the next page and then charge the battery

7 LOG IN TO FX3960 BASIC

7.1 INTRODUCTION:

When purchased, the FX3960 handset is paired with the FX3960 Basic. Below you will find the instructions when using the FX3960 alarm button want to log out and log back in. 7.2 LOGIN:

First make sure that the PIN code of

your FX3960 base is set to 0000. (from the factory this code is already 0000 but you may have changed it) and check if the wireless alarm button is switched on (switch on ON) base: On the base, select the “Registration” option and press OK wireless alarm button: press and hold the VOLUME + and – buttons at the same time pressed until the status indicator light after about 10 seconds alternately red/ green blink.

as long as the status indicator light is red/green flashes, the wireless alarm button is looking to the basics After a few seconds, a long whistle will sound from the alarm button and the indication light flashing green; the alarm button is now on the phone reported.

7.3 LOGOUT OF THE WIRELESS ALARM BUTTON:

Alarm buttons that are defective or lost can be found as follows sign out: 1. Select “delete HS” from the menu of the base FX3960. 2. Use the and buttons to select the FX3960 alarm button press the OK button 3. The FX3960 alarm button is logged out. 4. Pick up the handset of the FX3960 base and put it down down again to finish logging out.

8 OPERATION

8.1 ON/OFF SWITCH:

for normal use, the ON/OFF switch is in the ON position If you do not want to be disturbed temporarily, you can you slide this switch to OFF, the alarm button is then completely disabled

8.2 TELEFONEREN:

press key 1 to dial the number that with the FX3960 base under direct memory key M1 is programmed, or press button 2 for direct memory number M2 (see FX3960 . user manual) basis for programming this numbers) via the built-in speaker and microphone you can have the conversation completely hands-free feed

adjust the volume of the received sound u during the call with button VOL + /- arrange for press the phone key to end the call end (or place the alarm button on the Charger)

8.3 OPROEP AANNEMEN:

when you receive a call the call tone will sound you can adjust the ringer volume during change the ringing with button VOL + /- press the phone key to answer the call to take at the end press the phone key again press to end the call.

9 GENERAL

9.1 TIPS AND NOTES:

You do not need to hold the alarm button in your hand during the phone call, but make sure that the alarm button during the call not between your clothes comes or is covered by it, this hinders a good sound transmission.
You may return the alarm button to the charger after each use place; this has no negative consequences for the used lithium-ion battery.
The battery built into the alarm button has not expired to replace you. Please contact the Physical Service (see the back cover of this user manual for the contact details)
The alarm button is NOT waterproof and must be protected from rain and dust protected during use.
It is possible to assign multiple alarm buttons to the FX3960 base to link: – FX3960 base + max 5 alarm buttons / handsets
Only in combination with the Physic FX3960 base you can select the direct memory numbers M1 and M2 via the
dial alarm button and accept incoming calls. Bee login on other phones does not become any function guaranteed.
If the telephone line is already in use by the FX3960 alarm button and you press the alarm button on key 1 or 2,then a high/low error tone will sound after a few seconds. Please try again later.

9.2 STATUS INDICATOR LIGHT:

yellow: the emergency button is not on the phone yet reported; see section
7.1 and report the alarm button on your FX3960 base
flashes red/green alternately: the alarm button is in the registration process
flashes green: the alarm button is idle and in range of base
solid green: the alarm button is in the charger and the batteries are full
flashes red: battery is running low, set the alarm button to the charger to charge the battery • solid red: the alarm button is in the charger and the batteries are being charged

9.3 VERLICHTING ROND DE TELEFOONTOETS:

flashes blue: incoming call
solid blue: you are on a call via the alarm button\

10 WARRANTY CONDITIONS

You have a warranty on the Fysic FX3960 wireless alarm button of 24 months from date of purchase. We guarantee during that period, the free repair of defects caused by material and construction errors. Something in the end assessment of the importer. HOW TO ACT: If you notice a defect, please consult read this manual first. Doesn’t this one about this In the meantime, consult the supplier of this phone or the Fysic service department at www.fysic.com THE WARRANTY VOID: Improper use, incorrect connection, leaking and/or incorrectly installed batteries, use of non-original parts or accessories, use of non-rechargeable batteries, neglect and defects caused by moisture, fire, flood, lightning and natural disasters. In the event of unauthorized changes and/or repairs by third parties. In the event of incorrect transport of the device without suitable packaging and if the appliance is not accompanied by this warranty card and the purchase receipt. Power cords, plugs, and batteries are not covered by the Guarantee. Any further liability, in particular for any consequential damage is excluded.