FYSIC Smarthome350 User Manual
- June 5, 2024
- Fysic
Table of Contents
FYSIC Smarthome350
Getting started
- Before installing the Smarthome package and use its features. Make sure you have the SmartLife app installed on your smartphone or tabled.
- The app is freely available through the Google play store, Apple app store or by scanning the QR code on the side. The SmartLife app is free to download and there are no further program fees.
- After installing the app, make sure to register and activate the SmartLife account. The SmartLife app can not be used without a registered account.
- Note that all individuals you want to provide access to the Smarthome350 settings or scenario notifications require their own account.
- Open the SmartLife app and log in
- You will now see the home screen indicating no devices are active.
- From this menu you will have a clear overview of the different devices that have been added to you home. By pressing the added devices you will be able to set up the core settings of the device.
- Setting up the correct time zone
The correct time zone is important to effectively create scenarios based on
time.
- On the right bottom corner, press Me. This will show your account information.
- Press on your name to open the personal information screen
- Press the option time zone to select the time zone in which the SMARTHOME350 will be used.
- Then return to the “Me” screen to continue setting up your home.
Setting up your digital home
Through setting up your digital home, you will be able to clearly assign the
different smart products to specific rooms. This will create a clear overview
of the active devices in diffe-rent parts of your home.
- On the right bottom corner, press “Me”.
- Press the option “Home Management”.
- At the top you will see “My Home”, press that section to continue in the menu. Enter your selected home name
- Enter the home location. If GPS on you device is enabled the SmartLife app will automatically pinpoint your location. Press save to store your location.
- Select the type of rooms applicable to your situation. These are the rooms where the smart devices will be installed. More room options are available in the add room section. Keep in mind, you can always add new rooms later when new devices are added.
- Press “save” to continue
- Press “Home” on the left bottom corner to return to your home screen.
- The home screen has been updated with local weather information and your previously added rooms.
Installing the SMARTHOME350
Start by installing the SMART-BRIDGE10 Zigbee Gateway. This is the central
nerve center through which all products in this set communicate.
Follow the installation guide provided with the SMART-BRIDGE10 and add the
bridge to you SmartLife app.
When asked you can rename the SMART-BRIDGE10 and assign to a room the product
is installed in.
After the SMART-BRIDGE10 has been installed you can start setting up the
SMART-SMOKE10, SMART-DOOR10 and SMART-MOTION10.
Make sure the device is connected to the SmartLife app before installing the
devices to its final position.
The installation instructions are provided with each individual product and
can be followed as such. At the end of product installation, it will be
possible to change the name of the product and allocate the device to a
digital room. When using more than one of the same device (Such as SMART-
DOOR10) we suggest the name the products clearly. This will help to identify
notifications when the scenario’s are set up.
Setting up the scenario
In this example, we will monitor the fictive person Ms Brown. Ms Brown is a
keen elderly lady and very capable of living alone. Still, we would like to
monitor if Ms Brown is able to get out of bed in the morning and start up her
day by going to the living room or if she may require assistance.
The SMART_DOOR10 sensor has been placed on the Bedroom door connecting to the
living room. Ms Brown starts her day between at 06:00 sharp. To be safe we
will Set the scenario time for 05:00 until 07:00
First it is important to change the base alarm setting of the SMART-DOOR10
from all to none. This will make sure that only the actions within the 05:00
until 07:00 window are notified
- From the home screen, select the digital room the device is placed in.
- Select the device you want to set up (SMART-DOOR10).
- Select alarm setting on the middle right of the screen.
- In the Notice pop up menu deselect Alarm, keep Battery low enabled.
- Return to the home screen and stay in the digital room the SMART-DOOR10 is allocated to.
-
Select “Smart” in the bottom middle of the screen. This will open the Smart page where all created scenarios are stored. In here you can create, modify, activate, deactivate and delete all the different scenarios that have been set up. Note that this page will show all created scenario’s of all products connected to your SmartLife app.
Now you will be able to set up the desired Scenario.
In our example, we want to know if Ms Brown has used Bedroom door between 05:00 and 07:00. -
Select the following options:Select: “+” at the top right corner.
-
Select: “When device status changes”
-
Select: “Alecto SMART-DOOR10” or the personalized name for the door sensor. The available devices are grouped per room or all devices.
-
Select: “State”
-
Select: “Opened”
-
Select: “Send notification”
-
Select: “Message center” and Next to complete the base setup of the scenario
This is your basic scenario where an action
(opening of the SMART-DOOR10) at any time of day, triggers a reaction
(notification send). 
We want to have the notification send only during a specific time of the day (05:00 to 07:00). -
To make the scenario time specific to each day from 05:00 to 07:00. Select: “Effective period”
-
Select: “Custom”
-
Set the Start and Ending time of the Scenario and press confirm
-
Select: “Repeat” to choose which days the Scenario is active and press “<” to save.
-
Select: “Next” to save the time schedule
-
Finally, you can change the name of the Scenario to suit your needs
-
Select: “Save” at the bottom of the screen when finished and select yes when asked to activate the Scenario.
-
After saving the Scenario you will return to the Smart tab of the home page. The new scenario should be in place and enabled for use.
Sharing notifications with others
Through the SmartLife app it is possible to share your digital home with
others. Through which you allow multiple people such as family and caretakers
to receive the notifications from set up scenario’s.
Before a digital home can be shared the invitees require to have the SmartLife
app installed and an active account.
-
From your home menu select “Me” to enter your profile page. Select “Home Management” to enter your digital home.
-
Select your digital home in this case “Scenario example”
-
Select “Add Member”
-
This gives you various options to share the invitation code needed for others to beco-me members of your digital home. In this scenario we will select “Copy” as it provides the option to send the code through text, email and Whats app.
-
After selecting “Copy” the link is attached to your clipboard Send the invitation code to the designated person. The message will look similar to the image below.\ In this example the personal invitation code is: FBPKUX Note that this is a personal code valid for 3 days. The invitee has 3 days to add the digital home to his SmartLife account.
If you want multiple people to access you digital home or the 3 day period has passed and the invitation is no longer valid then repeat this step for each individual.
Accepting an invitation to a digital home
The invited person has to add the new home to his own SmartLife account. The
invi-tee has received the invitation code, has the SmartLife app installed and
is logged in through his own account.
From the Home screen select “Me” to enter the profile page.
-
Select “Home Management” to open your digital homes overview.
-
Select “Join a home
-
Insert the invitation code and press the arrow –> to accept and become a member.
After the invitation is accepted you can change the member status. -
From the Home screen select “Me” to enter the profile page. Select “Home Management” to open your digital homes overview.
-
Select your digital home
-
Select the newly added member to your digital home or the member you want to up-date the role.
There are two types of roles: Administrator and Common Member. Each role has a clearly defined set of actions that can used.
Administrator:
- Add rooms to digital home
- Switch devices between rooms
- Add devices to digital home
- View current product status
- Set up new scenario’s
- Receive notifications from active scenario’s
- Invite other people to digital home
- Manage the roles of other people in the digital home
Common Member:
- Receive notifications from active scenario’s
- View current product status
Carefully decide for each member what their participation level is and adjust the role accordingly. Assigned roles can be changed by all Administrators.