kaboodle KITCHEN KBNZ Kit W-70117 Corner Pantry Cabinet Instructions
- June 13, 2024
- kaboodle KITCHEN
Table of Contents
Corner pantry cabinet
KBNZ Kit W-70117 Corner Pantry Cabinet
Step 1
Follow these instructions to build and attach your cabinet.
Things you need to know
- All cabinets will need to be attached to the wall using a minimum of 8 gauge 65mm screws if you have a stud wall. If your wall is concrete, brick or another surface ask your hardware specialist for advice on the right fixing method.
- Make sure you leave plumbing and electrical work to qualified trades people. Never try this yourself.
- For extra strength use exterior woodworking glue when assembling cabinets.
- To help identify panels, counter sunk holes always face outwards.
- All holes that aren’t already pre-drilled should be drilled prior to screwing using a No 12 countersinking drill bit.
- Make sure you always use safety gear like a mask, ear muffs and glasses when using tools.
- If you have any questions, contact us on: Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST, New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.
Hardware included
Tools you will need
To put your kaboodle kitchen cabinets together you will need the following tools.
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12 countersinking drill bit
| ape measure| Pencil
---|---|---
Clamps (quick release)| Safety
gear| Adjustable square
****65mm wood screw| Spirit level (900mm recommended)| Wall fixing (If
necessary)
Step 1
hardware key
|
---|---
50mm wood screws| shelf supports
Assembling base component
Inserting adjustable shelves
hardware key
| 28mm
wood screws
---|---
Attaching end panels
Set the end panel to protrude 14mm from the front of the cabinet.
Secure using 28mm screws from the inside of the cabinet.
Note: Once the end panels are attached a 20mm void is created behind the
pantry. If required, pack the void prior to fixing the pantry to the wall for
extra stability.
Aattaching to wall
Caution: Please ensure all cabinets are screwed into your timber stud
wall using a minimum of 65mm timber screws.
If attaching to concrete, brick, steel or any other substrates seek advice
from your hardware specialist.
Ensure the cabinet is level before attaching to the wall in at least eight
locations.
Caring for your kaboodle cabinets
Looking after your cabinets is really easy and with the right care and
maintenance they will last you for many years. Just follow these simple steps
and if you need any more information you can contact us: Australia: 1800 666
078 Monday to Friday between 8:00am and 6:00pm AEST. New Zealand: 0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST or email:
info@kaboodlegroup.com.au.
Clean your cabinets with an all purpose, non-abrasive cleaner with a damp
sponge or cloth and make sure you never use saturated cloth, harsh chemicals
or thinner based cleaners as these will damage the surface of the melamine.
Likewise, never use products that will scratch the surface like steel wool or
wire brushes and avoid sharp objects that will scratch, cut or gouge the
melamine surface. If this happens the internal board will be exposed and may
swell. Kaboodle cabinets are water resistant but not water proof so any spills
should be attended to immediately.
Handy hint: if the melamine surface of your cabinet is damaged you can try and
cover it with a furniture repair crayon but just remember that this won’t seal
the board back to its original finish.
We offer a dedicated customer service line for advice or any questions you may
have on kaboodle products.
Call customer service on: Australia: 1800 666 078 Monday to Friday between
8.00am and 6.00pm AEST
New Zealand: 0800 522 663 Monday to Friday between 8.00am and 5.00pm NZST or
email: info@kaboodlegroup.com.au
W-70117
Ver. 9