kaboodle kitchen W-51636 900mm Slideout Rangehood Cabinet Instruction Manual

June 12, 2024
kaboodle KITCHEN

kaboodle kitchen W-51636 900mm Slideout Rangehood Cabinet

Product Information

The product is a 900mm slideout rangehood cabinet from Kaboodle. It is designed for building and attaching cabinets in a kitchen. The hardware required for assembly is included in the package, which includes 50mm wood screws, 28mm wood screws, stick-on end caps, and door buffers. In addition to the hardware, the user will need tools such as a countersinking drill bit, tape measure, pencil, clamps (quick release), safety gear, adjustable square, 65mm wood screw, spirit level (900mm recommended), wall fixing (if necessary), and cabinet stand.

Things you need to know

  • All cabinets will need to be attached to the wall using a minimum of 8 gauge 65mm screws if you have a stud wall. If your wall is concrete, brick or another surface ask your hardware specialist for advice on the right fixing method.
  • Make sure you leave plumbing and electrical work to qualified trades people. Never try this yourself.
  • For extra strength use exterior woodworking glue when assembling cabinets.
  • To help identify panels, counter sunk holes always face outwards.
  • All holes that aren’t already pre-drilled should be drilled prior to screwing using a No 12 countersinking drill bit.
  • Make sure you always use safety gear like a mask, ear muffs and glasses when using tools.
  • If you have any questions, contact us on:
    Australia: 1800 666 078 Monday to Friday between
    8:00am and 6:00pm AEST, New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST
    or email: info@kaboodlegroup.com.au.

Hardware included

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-1

Tools you will need

To put your kaboodle kitchen cabinets together you will need the following tools.

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-2

hardware key

installation

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-4 kaboodle-
kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-FIG-5

Identify the height of the bottom panel to allow for your rangehood
Note: The bottom panel is designed to be adjustable to suit most common brands of rangehoods. Prior to fitting this panel it is wise to observe the manufacturer’s specifications.

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-5

attaching end panels

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-7

With the aid of cabinet supports, align cabinets and hold together using clamps.
Tip: If a pantry has been installed, align wall cabinets to the height of the pantry.

Note : AS/NZ Standards state the minimum clearance to the underside of the rangehood is 650mm from the trivet for gas and 600mm for electric cooktops or the appliance specifica-tion, whichever is greater. Be sure to check your appliance specifications before completing your installation.

Check that all cabinets are level and screw into wall using the correct fixings.

Caring for your kaboodle cabine ts
Looking after your cabinets is really easy and with the right care and maintenance they
will last you for many years. Just follow these simple steps and if you need any more information you can contact us: Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST. New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.

Clean your cabinets with an all purpose, non-abrasive cleaner with a damp sponge or cloth and make sure you never use saturated cloth, harsh chemicals or thinner based cleaners as these will damage the surface of the melamine. Likewise, never use products that will scratch the surface like steel wool or wire brushes and avoid sharp objects that will scratch, cut or gouge the melamine surface. If this happens the internal board will be exposed and may swell. Kaboodle cabinets are water resistant but not water proof so any spills should be attended to immediately.
Handy hint: if the melamine surface of your cabinet is damaged you can try and cover it with a furniture repair crayon but just remember that this won’t seal the board back to its original finish.

We offer a dedicated customer service line for advice or any questions you may have on kaboodle products.

kaboodle-kitchen-W-51636-900mm-Slideout-Rangehood-Cabinet-
FIG-9

Call customer service on:
Australia: 1800 666 078 Monday to Friday between 8.00am and 6.00pm AEST
New Zealand: 0800 522 663 Monday to Friday between 8.00am and 5.00pm NZST or email: info@kaboodlegroup.com.au

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals