kaboodle KITCHEN W-50131 Slimline Cabinet Door Lift Mechanism Instruction Manual
- June 12, 2024
- kaboodle KITCHEN
Table of Contents
KITCHEN W-50131 Slimline Cabinet Door Lift Mechanism
Instruction Manual slimline cabinet door lift mechanism
W-50131 Slimline Cabinet Door Lift Mechanism
step 2
Follow these instructions to add your parts and accessories.
Things you need to know
- Always read the full instructions prior to installation.
- Consider possible obstructions to your part and accessories, like hinges inside the cabinet or adjacent cabinet doors and handles, prior to installation.
- Make sure you leave plumbing and electrical work to qualified trades people. Never try this yourself.
- Make sure you always use safety gear like a mask, ear muffs and glasses when using tools.
- Tip: After marking out the pre-drill holes as per the instructions, take the part that is to be installed and align the appropriate holes with the markings to ensure they match up prior to pre-drilling the holes.
- If you have any questions, contact us on:
Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST, New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.
Hardware included
Tools you will need
To put your caboodle kitchen accessory together you will need the following
tools.
Cordless drill with:
- Number 2 screw tip
- 2mm drill bit
- 5mm drill bit (for Ø5mm peg holes)
position cabinet drilling template
-
Position included drilling template on cabinet sides and mark out drilling positions. 2 x peg holes (Ø5x5mm) and 3x screw holes (each side). Refer back page for actual drilling measurements (if required).
attaching slimline cabinet door lift mechanism pre-drill locator holes fitting mechanism -
Pre drill 2 x peg holes (Ø5x5mm) and screw holes.
-
Position mechanism so that pegs locate into 5mm peg holes. Fix with 3 x 38mm screws each side. Caution when opening arm. mark out drilling positions for door brackets
-
Mark out drilling positions for door brackets on each side of door as per above.
pre drill locator holes -
Pre drill locator holes as marked
fitting door brackets -
Use included 16mm screws to fix the door brackets to the door.
attaching door to mechanism -
Clip door bracket into place on hinge arm. W-50130 / W-50131
attaching slimline cabinet door lift mechanism adjusting door tension -
If door is dropping, increase door resistance by turning adjustment screw clockwise until door holds in position
If door is lifting, decrease door resistance by turning adjustment screw counter clockwise until door holds in position -
adjusting door position To adjust doors horizontal position, turn cam screw at front of hinge arm accordingly.
1. vertical adjustment
2. horizontal adjustment
3. depth adjustment
attaching slimline cabinet door lift mechanism fitting covers -
Fit covers to mechanism. Covers are labelled L and R to to easily identify position.
-
Installation dimensions as per drilling template
caring for your caboodle parts and accessories
Looking after your parts and accessories is really easy and with the right
care and maintenance they will last you for many years. Just follow these
simple step. Hinges, runners and other parts and accessories should be kept
dry at all times.
To keep the mechanisms performing at their best, regularly wipe them with a
dry cloth removing any dust and grime that may build up. We offer a dedicated
customer service line for advice or any questions you may have on Kaboodle
products.
Just follow these simple steps and if you need any more information you can
contact us us: Australia: 1800 666 078 Monday to Friday between 8:00am and
6:00pm AEST. New Zealand: 0800 522 663 Monday to Friday between 8:00am and
5:00pm NZST or email:
info@kaboodlegroup.com.au.
W-50130 / W-50131
Ver. 1