kaboodle kitchen W-51889 900 Medium Slideout Rangehood Cabinet Instruction Manual

June 12, 2024
kaboodle KITCHEN

kaboodle kitchen W-51889 900 Medium Slideout Rangehood Cabinet

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-1

Product Information

  • Product Name: 900 medium slideout rangehood cabinet
  • Hardware Included:
    • A: 50mm wood screws x 20
    • B: 28mm wood screws x 5
    • C: Stick on end caps x 5
    • D: Door buffer x 4
  • Tools Required:
    • Countersinking drill bit
    • Tape measure
    • Pencil
    • Clamps (quick release)
    • Safety gear
    • Adjustable square
    • 65mm wood screw
    • Spirit level (900mm recommended)
    • Wall fixing (If necessary)
    • Cabinet stand

Product Usage Instructions

  • Step 1: Assembling Cabinet
    Follow the steps below to assemble the cabinet:

    • Identify the top panel and back panel of the cabinet.
    • Attach the top panel to the back panel using screws A.
    • Attach the side panel to the top and back panels.
    • If using end panels, follow the end panel instructions for installation tips.
  • Step 2: Joining Cabinets
    To join multiple cabinets together, follow these steps:

    • Align the cabinets using cabinet supports and hold them together with clamps.
    • If installing a pantry, align wall cabinets to the height of the pantry.
    • Ensure a minimum clearance of 650mm from the trivet for gas cooktops and 600mm for electric cooktops (or follow appliance specifications).
    • Screw all cabinets into a timber stud wall using 65mm timber screws. Seek advice from a hardware specialist if attaching to concrete, brick, steel, or other substrates.
    • Check that all cabinets are level and securely screw them into the wall using the appropriate fixings.
  • Step 3: Caring for Your Kaboodle Cabinets
    To ensure the longevity of your cabinets, follow these care instructions:

    • Regularly clean the surface of the cabinets using suitable cleaning products.
    • Avoid using abrasive materials or harsh chemicals that may damage the cabinet finish.
    • If the melamine surface is damaged, you can try covering it with a furniture repair crayon. However, note that this will not restore the original finish.
  • Step 4: Installing Benchtop

    • Complete your Kaboodle Kitchen by installing the benchtop according to the provided instructions.
    • If you have any further questions or need assistance, please contact our customer service:
    • Australia: 1800 666 078 (Monday to Friday between 8:00am and 6:00pm AEST)
    • New Zealand: 0800 522 663 (Monday to Friday between 8:00am and 5:00pm NZST)
    • Email: info@kaboodlegroup.com.au

Things you need to know

  • All cabinets will need to be attached to the wall using a minimum of 8 gauge 65mm screws if you have a stud wall. If your wall is concrete, brick or another surface ask your hardware specialist for advice on the right fixing method.
  • Make sure you leave plumbing and electrical work to qualified trades people. Never try this yourself.
  • For extra strength use exterior woodworking glue when assembling cabinets.
  • To help identify panels, counter sunk holes always face outwards.
  • All holes that aren’t already pre-drilled should be drilled prior to screwing using a No 12 countersinking drill bit.
  • Make sure you always use safety gear like a mask, ear muffs and glasses when using tools.
  • If you have any questions, contact us on:
    Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST, New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.

Hardware included

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-2

Tools you will need

To put your kaboodle kitchen cabinets together you will need the following tools.

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-3

ASSEMBLY INSTRUCTION

hardware key

assembling cabinet

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-5
kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-6

Identify the height of the bottom panel to allow for your rangehood
Note: The bottom panel is designed to be adjustable to suit most common brands of rangehoods. Prior to fitting this panel it is wise to observe the manufacturer’s specifications.

attaching end panels
Note: end panels are only needed if you are using end panels either side of your oven cabinet. If you are not, move on to joining cabinets.

joining cabinets
With the aid of cabinet supports, align cabinets and hold together using clamps.

  • Tip: If a pantry has been installed, align wall cabinets to the height of the pantry.
  • Note: AS/NZ Standards state the minimum clearance to the underside of the rangehood is 650mm from the trivet for gas and 600mm for electric cooktops or the appliance specification, whichever is greater. Be sure to check your appliance specifications before completing your installation.

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-8

fixing cabinets to wall

kaboodle-kitchen-W-51889-900-Medium-Slideout-Rangehood-Cabinet-
fig-9

Caution: Please ensure all cabinets are screwed into your timber stud wall using a minimum of 65mm timber screws. If attaching to concrete, brick, steel or any other substrates seek advice from your hardware specialist.

Caring for your kaboodle cabinets

  • Looking after your cabinets is really easy and with the right care and maintenance they will last you for many years. Just follow these simple steps and if you need any more information you can contact us: Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST. New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.
  • Clean your cabinets with an all purpose, non-abrasive cleaner with a damp sponge or cloth and make sure you never use saturated cloth, harsh chemicals or thinner based cleaners as these will damage the surface of the melamine. Likewise, never use products that will scratch the surface like steel wool or wire brushes and avoid sharp objects that will scratch, cut or gouge the melamine surface. If this happens the internal board will be exposed and may swell. Kaboodle cabinets are water resistant but not water proof so any spills should be attended to immediately.

Handy hint:
if the melamine surface of your cabinet is damaged you can try and cover it with a furniture repair crayon but just remember that this won’t seal the board back to its original finish.

ABOUT COPANY

  • Call customer service on: Australia: 1800 666 078 Monday to Friday between 8.00am and 6.00pm AEST
  • New Zealand: 0800 522 663 Monday to Friday between 8.00am and 5.00pm NZST or email: info@kaboodlegroup.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals