kaboodle KITCHEN 2 tier Corner Rotating Baskets Installation Guide

kaboodle KITCHEN 2 tier Corner Rotating Baskets

Things you need to know

• Always read the full instructions prior to installation.

• Consider possible obstructions to your parts & accessories, like hinges inside the cabinet or adjacent cabinet doors and handles, prior to installation.

• Make sure you leave plumbing and electrical work to qualified trades people. Never try this yourself.

• Make sure you always use safety gear like a mask, ear muffs and glasses when using tools.

• Tip: After marking out the pre-drill holes as per the instructions, take the part that is to be installed and align the appropriate holes with the markings to ensure they match up prior to pre-drilling the holes.

• If you have any questions, contact us on:
  Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST, New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au

• Instructions apply to:
  W- 50542 Corner Rotating Baskets 2 Tier*
  W-50779 Corner Rotating Tray 2 Tier Solid Shelf Premium Dark Grey**

• *wire base baskets **solid base baskets

• Note: Illustrations found in this installation guide serve as a reference and may vary when compared to the actual product.

Hardware included

Tools you will need
To put your kaboodle kitchen accessory together you will need the following tools.

hardware key

Installation Guide

1. Securing adjustable shelf
   Carefully remove shelf supports and lay the adjustable shelf flat on the bottom of the cabinet, flush with the back corner. Pre-drill using a countersinking drill bit and fix the shelf to the base of the cabi-net with the 8x28mm wood screws (A) provided. Note: This step is included as adjustable shelves cannot be removed or added to a corner cabinet once the benchtop has been installed.

2. Pre-drilling for pole brackets
   Bottom – Using a square rule, mark out and pre-drill a hole at the bottom of the cabinet as per the diagram above. Use a 5mm drill bit to pre-drill the hole to a depth of roughly 10mm.
   Top – Using a square rule, mark out and pre-drill a hole into the underside of the benchtop as per the diagram above. Use a 2mm drill bit to pre-drill a hole to a depth of roughly 2.5mm.

3. Fixing pole brackets
   Bottom – Push the bottom pole bracket (C) into the pre-drilled hole and secure into place using 3 x 15mm wood screws (B).
   Top – Align the middle hole of the top pole bracket (D) with the pre-drilled hole on the underside of the benchtop and screw into place with a 15mm wood screw (B). Use remaining wood screws to secure into place.

4. Installing top basket
   Place a basket inside the corner cabinet and then slide the bottom of the centre pole (E) through the centre of the basket. Push the basket up the centre pole towards the top. Note: Some force is required for this step and it may be easier to apply if you stand the basket up against the side of the cabinet and push the pole into place.

5. Installing basket mounts & second basket
   Slide a basket mount (F) over the bottom of the centre pole and push up closer to the top basket, as pictured above.
   Next slide the second basket onto the centre pole, followed by the second basket mount.

6. Fixing pole to bottom bracket
   Carefully stand the unit up, ensuring the centre pole is securely positioned on the bottom pole bracket.

7. Fixing pole to top bracket
   Adjust the height of the centre pole so that it slides up and fits securely into the top pole bracket. Hold in place and push the locking mechanism down firmly to lock it into position.

8. Adjusting the baskets
   Lift the top basket and mount to the desired height. Push a basket fixing pin (G) through the centre pole hole underneath to hold the position. Slide the basket mount down onto the fixing pin. Once properly installed, slowly lower the basket into position.
   To secure, fix a basket fixing clip (H) into the hole directly above. Repeat with bottom basket, if desired, to complete installation.

Caring for your kaboodle cabinets

Looking after your cabinets is really easy and with the right care and maintenance they will last you for many years. Just follow these simple steps and if you need any more information you can contact us: Australia: 1800 666 078 Monday to Friday between 8:00am and 6:00pm AEST. New Zealand: 0800 522 663 Monday to Friday between 8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au

Clean your cabinets with an all purpose, non-abrasive cleaner with a damp sponge or cloth and make sure you never use saturated cloth, harsh chemicals or thinner based cleaners as these will damage the surface of the melamine. Likewise, never use products that will scratch the surface like steel wool or wire brushes and avoid sharp objects that will scratch, cut or gouge the melamine surface. If this happens the internal board will be exposed and may swell. Kaboodle cabinets are water resistant but not water proof so any spills should be attended to immediately.

Handy hint: if the melamine surface of your cabinet is damaged you can try and cover it with a furniture repair crayon but just remember that this won’t seal the board back to its original finish.
Caring for your kaboodle parts and accessories: Hinges, runners and other parts and accessories should be kept dry at all times. To keep the mechanisms performing at their best, regularly wipe them with a dry cloth removing any dust and grime that may build up.

We offer a dedicated customer service line for advice or any questions you may have on kaboodle products.

Call customer service on:
Australia: 1800 666 078 Monday to Friday between 8.00am and 6.00pm AEST
New Zealand: 0800 522 663 Monday to Friday between 8.00am and 5.00pm NZST or email: info@kaboodlegroup.com.au

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>