TORO 46400 Bullseye QuickGroom Buttars Equipment Tremonton Instruction Manual

Form No. 3463-223 Rev A Parts Catalog
QuickGroom 550
Model No. 46400—Serial No. 322C210353 and Up

46400 Bullseye QuickGroom Buttars Equipment Tremonton

Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part.
This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1,6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.

Decal Assembly

Electrical and Drawbar Assembly

Driveline Assembly

DIA40/DIA31 L-44
7| 144-7717| 20| Nut, Self Locking – M 10
8| 144-8136| 2| Bolt M10 X 120 – ISO 4014
9| 144-8137| 2| Set Screw M6 X 16 Din 913
10| 144-7791| 2| Swing Arm
11| 144-7708| 2| Bearing Ucfl 206
12| 144-8138| 4| Large Washer M16 – Din 9021
13| 144-8139| 4| Nut M10 – Din 934
14| 144-7768| 2| Bolt M 10 X 30
15| 144-7946| 12| Large Washer M10 – Din 9021
16| 144-7951| 8| Nut, Self Lock M16 10.9 – ISO 10511
17| 144-7920| 2| Bolt M10 X 25 – ISO 4017
18| 144-8140| 4| Bolt M10 X 75 – ISO 4014
19| 144-8141| 8| Bolt M16 X 40 – ISO 4017
20| 144-7921| 8| Spring Washer M10 – Din 127
21| 144-8109| 8| Bolt M10 X 20 – ISO 4017
22| 144-8142| 2| Spanner
23| 144-8143| 2| Spanner 5/8 14T
24| 144-7708| 2| Bearing Ucfl 206
25| 144-7792| 1| Cover Front
26| 144-7793| 2| Swingarm Driven
27| 144-7794| 2| Cover Back
28| 144-7947| 2| Bolt M10 X 35 – ISO 4017
29| 144-8144| 4| Nylon Bushing DIA63/DIA72 L-12
30| 144-7795| 1| Cross Beam Front
31| 144-8145| 1| Cross Beam Back Toro
32| 144-7920| 8| Bolt M10 X 25 – ISO 4017

Wheel Assembly

DIA40/DIA31 L-18.6
9| 144-8152| 2| Circlip D-30 – Din 471
10| 144-8154| 2| Wheel 16 X 6.50
11| 144-8155| 8| Wheel Nut M12X1.5
12| 144-8156| 2| Flexicap DIA63.5 L-38
13| 144-7705| 8| Nut, Self Locking – M 12
14| 144-7717| 8| Nut, Self Locking – M 10
15| 144-8157| 8| Bolt M10 X 35 – Din 7991
16| 144-8158| 8| Spring Washer M6 – Din 127
17| 144-8159| 8| Bolt M6 X 16 – ISO 4017
18| 144-8160| 4| Round Tube End Insert
19| 144-7955| 8| Bolt M12 X 25 – ISO 4017
20| 144-8161| 4| Height Adjustment Pin
21| 144-8162| 4| R-Clip Round 3, Din 11024
22| 144-8163| 2| Guide
23| 144-8164| 2| Guide
24| 144-7790| 2| U-Bracket
25| 144-7789| 1| Frame Brush

Register atwww.Toro.com/bullseye.
Original Instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>