TORO 03229 Reelmaster 3105-D or Groundsmaster Traction Unit Installation Guide

TORO 03229 Reel master 3105-D or Grounds master Traction Unit Installation

Guide

Model No. 03229

Preparing the Machine

1. Park the machine on a level surface.
2. Disengage the PTO (if equipped) and lower the cutting units.
3. Engage the parking brake.
4. Shut off the engine and remove the key.
5. Wait for all movement to stop and allow the machine to cool.

WARNING
Hot hydraulic fluid can cause severe burns.
Allow the hydraulic fluid to cool before performing any maintenance to the hydraulic system.
6. Relieve all pressure from the hydraulic system; refer to the Service Manual for your machine.

DANGER
Hydraulic fluid escaping under pressure can penetrate the skin and cause injury.
• Ensure that all hydraulic fluid hoses and lines are in good condition and that all hydraulic connections and fittings are tight before applying pressure to the hydraulic system.
• Keep your body and hands away from pinhole leaks or nozzles that eject high pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic leaks.
• Safely relieve all pressure in the hydraulic system before performing any work on the hydraulic system.
• Get immediate medical help if fluid is injected into the skin.
7. Remove the hood from the machine; refer to the Operator’s Manual for your machine.

Lifting the Back of the Machine

Lift the back of the machine; refer to the Operator’s Manual or Service Manual for your machine.

Removing the Rear Wheel and Hub Assembly

Installing the Hydraulic Motor, Hub, and Rear Wheel

Parts Required

Removing the Hydraulic Hose

Installing the Hydraulic Hoses

Parts Required

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>