EUROfase LIGHTING 38144 Tura Wall Sconce Instruction Manual
- June 13, 2024
- EUROfase LIGHTING
Table of Contents
UROfase LIGHTING 38144 Tura Wall Sconce
Product Information
You have purchased a lighting product that is designed to provide you with years of enjoyment. This product requires assembly and comes with the following specifications:
- Model Number: 38144
- Assembly Time: Approximately 20 minutes
- Tools Required (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire cutters
- Helpful Tools (not included): Wire strippers, Ladder
- Power Requirement: 1 X 60W MAX, A19, 120V, 60Hz (Bulb not included)
Product Usage Instructions
Please follow the steps below to assemble and install your lighting product:
- Ensure you have all the necessary tools mentioned above for assembly.
- Identify the components:
- A-Outlet Box screw x 2
- B-Black wire (L) from junction box
- C-White wire (N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire (L) from fixture
- F-White wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
- Begin the assembly process by attaching the outlet box screws (A) to your junction box using a screwdriver.
- Connect the black wire (B) from the junction box to the black wire (E) from the fixture. Use a wire connector (H) to secure the connection.
- Connect the white wire (C) from the junction box to the white wire (F) from the fixture. Use another wire connector (H) to secure the connection.
- If your fixture has a green wire or bare copper wire (G), connect it to the green wire/bare copper wire (D) from the junction box using a wire connector (H).
- Make sure all connections are secure and properly insulated using electrical tape if necessary.
- Once the assembly is complete, follow the instructions provided with your bulb to install it into the fixture.
- Finally, mount the assembled lighting product onto your desired location using appropriate mounting hardware.
For any future reference, please save these instructions. If you need further assistance, please consult the user manual.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
INSTALLATION
1 X 60W MAX,A19,120V,60Hz (Bulb not included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Thank You: You’ ve just purchased a lighting product designed and built to provide you with years of enjoyment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>