EUROfase LIGHTING 38158-025 Comparelli 1 Light 8 Inch Off White Pendant Ceiling Light Instruction Manual
- June 12, 2024
- EUROfase LIGHTING
Table of Contents
EUROfase LIGHTING 38158-025 Comparelli 1 Light 8 Inch Off White Pendant
Ceiling Light
Product Information
Product Model: 38158
Product Type: Unknown
Power Specifications: 1x60W MAX.TYPE A19,120V,60HZ (Bulb not included)
Additional Notes:
- 1x60W MAX.TYPE A19,120V,60HZ (L’ampoule n’est pas comprise)
- (No se incluye la bombilla)
Product Usage Instructions
To install the product, follow these steps:
- Ensure you have the necessary tools and materials for installation.
- Identify the components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Smooth side wire (L) from fixture
- F-Ribbed side wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
- Attach the outlet box screws (A) to the junction box using a screwdriver.
- Connect the black wire (B) from the junction box to the smooth side wire (E) from the fixture using a wire connector (H).
- Connect the white wire (C) from the junction box to the ribbed side wire (F) from the fixture using a wire connector (H).
- Connect the green wire/bare copper (D) from the junction box to the green wire/bare copper (G) from the fixture using a wire connector (H).
- Secure all wire connections using the wire connectors (H).
- Install a compatible bulb (not included) with the specifications: 1x60W MAX.TYPE A19,120V,60HZ.
- Turn on the power supply and test the fixture.
For any further assistance or troubleshooting, refer to the complete user manual or contact customer support.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder.
PARTS
1x60W MAX.TYPE A19,120V,60HZ (Bulb not included)
- A -Outlet Box screw x 2
- B -Black wire(L) from junction box
- C -White wire(N) from junction box
- D -Green wire/Bare copper (G) from junction box
- E -Smooth side wire (L) from fixture
- F -Ribbed side wire (N) from fixturer
- G -Green wire/Bare copper from fixture
- H -Wire connector x 3
Read User Manual Online (PDF format)
Loading......