FREAKS SP4227B Wireless Basics Controller Instruction Manual
- September 5, 2024
- FREAKS
Table of Contents
FREAKS SP4227B Wireless Basics Controller
SP4227B SUPPORT ET INFOS TECHNIQUES WWW.FREAKSANDGEEKS.FR
Android / IOS
Press the “SHARE + HOME” buttons for 3 seconds, then “Wireless Controller” is
displayed in the list of Bluetooth devices.
PS3 et PC
Connect the controller using the USR charging cable .
PS4 First connection
Connect the console to the controller using the USB charging cable. Once the
Home light glows blue, press it to access the login page and select your user
account. You can now remove the USB cable.
Reconnection
The USB cable is not required for the next wireless connection. If the console
is on, press Home button on the controller: the controller works.
Charging
Plug in the USB cable, the Home button will light up red while the controller
is charging, then turn off when the controller is charged.
Specifications
- Voltage: DC3.5v – 4.2V
- Input current: less than 330mA
- Battery life: about 6-8 hour
- Standby time: about 25 days
- Voltage/charge current: about DC5V / 200mA
- Bluetooth transmission distance: approx. 10m
- Battery capacity: 600mAh
Wireless Specifications
- Frequency Range: 2402-2480MHz
- MAX E.I.R.P.: < 1.5dBm
Update
If the controller can not pair the newest version of the console, please go to
our official website to get the newest firmware upgrade :
www.freaksandgeeks.fr
WARNING
- Use only the supplied charging cable to charge this product.
- It you near a suspicious sound, smoke, or a strange smell, stop using this product.
- Do not expose this product or the battery it contains to microwaves, high temperatures, or direct sunlight.
- Do not let this product come in contact with liquids or handle it with wet or greasy hands. If liquid gets inside, stop using this product
- Do not subject this product or the battery it contains to excessive force. Do not pull on the cable or bend it sharply.
- Keep this product and is ajika going out of reach of youth chasten. Packaging elements could be ingested. The cable could wrap around children’s necks.
- People with injuries or problems with fingers, hands or arms should not use the vibration function
- Do not attempt to disassemble or repair this product or the battery pack. If either is damaged, stop using the product.
- If the product is dirty, wipe it with a soft, dry cloth. Avoid the use of thinner, benzene or alcohol.
REGULATORY INFORMATION
Disposal of used batteries and waste electrical and electronic equipment
This symbol on the product, its batteries or its packaging indicates that the product and the batteries it contains must not be disposed of with household waste. It is your responsibility to dispose of them at an appropriate collection point for the recycling of batteries and electrical and electronic equipment. Separate collection and recycling help to preserve natural resources and avoid potential negative effects on human health and the environment due to the possible presence of hazardous substances in batteries and electrical or electronic equipment, which could be caused by incorrect disposal. For more information on the disposal of batteries and electrical and electronic waste, contact your local authority, your household waste collection service or the shop where you purchased this product. This product can use lithium. NiMH or alkaline batteries.
Simplified European Union Declaration of Conformity
- Trade Invaders hereby declares that this product complies with the essential requirements and other provisions of Directive 2014/30/EU. The full text of the European Declaration of Conformity is available on our website www.freaksandgeeks.fr
- Company: Trade Invaders S.A.S. Address: 28, Avenue Ricardo Mazza Saint-Thibéry, 34630 Country: France Telephone number: +33 4 67 00 23 51
The operating radio frequency bands of the SP4227B and the corresponding maximum power are as follows: Bluetooth LE 2.402 to 2.480 GHz, 0 dBm (EIRP)