Eurofase LIGHTING 48089 ANYA 65 Inch Rectangular Mirror Instruction Manual
- June 1, 2024
- EUROfase LIGHTING
Table of Contents
Eurofase LIGHTING 48089 ANYA 65 Inch Rectangular Mirror
Product Information
Specifications:
- Model: ANYA 48089
- Power: 52W MAX, LED, 120V~, 60Hz
Product Usage Instructions
Installation:
- Ensure the power source is switched off before installation.
- Mount the lighting product securely using appropriate fixtures or hooks.
- Connect the product to the power source following the provided wiring instructions.
Operation:
- Turn on the power source and switch on the lighting product.
- Adjust the lighting direction or intensity as needed using any included controls.
Maintenance:
- Regularly clean the product using a soft, dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
FAQ (Frequently Asked Questions)
Q: How do I replace the LED bulb in the ANYA 48089?
A: To replace the LED bulb, follow these steps:
- Turn off the power source and allow the bulb to cool.
- Carefully remove the old bulb by twisting it counterclockwise.
- Insert the new LED bulb by twisting it clockwise until secure.
- Turn on the power source to check if the new bulb is working properly.
Q: Can I use a dimmer switch with the ANYA 48089?
A: Yes, you can use a compatible dimmer switch with the ANYA 48089 to
adjust the brightness levels according to your preference.
Customer Service & Tech Support:
905-695-2147
Email: Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
52W MAX,LED, 120V~,60Hz
(LED driver included)
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- When using an electrical furnishing, basic precautions should always be followed, including the following:
- Read all instructions before using (this furnishing).
- DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
- WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
- Unplug from outlet before putting on or taking off parts.
- Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this fumishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never operate the fumishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- WARNING: Risk of Injury – Keep children away from this furnishing.
- WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
- GROUNDING INSTRUCTIONS:
- For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
- For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
- This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
- For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
- WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
- Mount furnishings at the correct height.
- This unit is suitable for installation in a damp, indoor location only.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instructions for future reference.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder.
HARDWARE INCLUDED
Assembly
Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.
OPERATION INSTRUCTIONS
-
Short touch: ON and OFF
Press and hold: Dimmable -
Short touch to turn ON and OFF for the defogger function.
Automatic turn off after 1 hour. -
Short touch to adjust the colour temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool).
Press and hold: Stepless CCT.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>