EUROfase LIGHTING 38152 Ombra 2 Light Medium Chandelier Instruction Manual
- June 13, 2024
- EUROfase LIGHTING
Table of Contents
EUROfase LIGHTING 38152 Ombra 2 Light Medium Chandelier Instruction Manual
Thank You You’ ve
just purchased a lighting product designed and built to provide you with years
of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression. EUOTAS
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape and Wire cutters. Helpful Tools (not
included): Wire strippers, Ladder
24W MAX, 120V 60 Hz
(Dimmable LED included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Red wire (LED+) from driver
- F- Black wire (LED-) from driver
- G- Green wire/Bare copper from mounting plate
- H- Wire connector x 3
- I- Red wire (LED+) from fixture
- J- Black wire (LED-) from fixture
Read User Manual Online (PDF format)
Loading......