GEEKOM MiniAir 11 Mini PC User Guide
- June 5, 2024
- GEEKOM
Table of Contents
GEEKOM MiniAir 11 Mini PC
Overview
Function
- SD Reader
- Speaker/Headset
- Power Button/LED
- Ethernet Port
- Electric Power Inlet
- HDMI Port
- USBC port+USB 3.2 Gen 1 port
- USB 3.2 Gen 2 port+USB-C port
- Consumer Infrared (CIR)
- Mini DisplayPort Connector
- Anti-Theft Key Lock Hole
Ram
M.2 SSD
1.2V DDR4
VESA
Safety and Caution Information
-
AC Power Adapter:
Risk of electric shock, fire, or burn if using an AC adapter other than the one provided with this device. Indoor use only and in dry locations. The device must only be repaired by a professional. Do not open the enclosure. The adapter is rated for use between 0 ‘Cand 35 c (32 “Fand 95 “F). Connect only to a properly wired and grounded outlet. -
Risk of explosion
If the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. -
Failure to use the included power adapter shall violate regulatory compliance requirements and may expose the user to safety hazards.
-
Temperature:
This device is intended for use in ambient temperatures between 0′ C and 35’C (32″Fand 95′ F). Avoid using or storing next to heat sources, in direct sunlight, or outside the intended temperature ranges. -
Medical:
This device may interfere with the operation of some pacemakers, hearing aids, or other medical devices. To reduce the risk, maintain a separation distance of 20 cm (8 inches) between the device and the medical device. Refer to the medical device for additional information. -
Modify:
Modification of the wireless solution, thermal solution, device components, or enclosure shall violate regulatory compliance requirements and may induce safety hazards.
FCC STATEMENT CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FC KUles. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. lf this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- ncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FGC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
Connect to a Network
- Click the network icon in the notification area in Windows. A list of available wireless networks will be shown.
- Select the desired network, and input the information (if needed).
Note:
when connecting to a secured wireless network, enter your W-i password when
prompted.
Customer Support:
support@geekompc.com.
www.geekompc.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>