EUROfase LIGHTING 34161 Guelph Chrome Bath Bar Instruction Manual
- June 12, 2024
- EUROfase LIGHTING
Table of Contents
EUROfase LIGHTING 34161 Guelph Chrome Bath Bar
Product Information
- You have purchased a lighting product that is designed to provide you with years of enjoyment. This product requires assembly and comes with the following items:
-
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire (L) from fixture
- F-White wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
- A-Outlet Box screw x 2
- The estimated assembly time for this product is 20 minutes. Please note that the tools required for assembly are not included in the package. You will need a flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and wire strippers for assembly. A ladder may also be helpful.
- Make sure to save these instructions for future reference.
Product Usage Instructions
- Identify the outlet box screw (A) and use it to secure the junction box to the desired location.
- Connect the black wire (B) from the junction box to the black wire (E) from the fixture using a wire connector (H).
- Connect the white wire (C) from the junction box to the white wire (F) from the fixture using another wire connector (H).
- Connect the green wire/bare copper (D) from the junction box to the green wire/bare copper (G) from the fixture using a third wire connector (H).
- Ensure all connections are secure and properly insulated with electrical tape.
- Follow any additional instructions provided with the product for mounting or installation.
- Refer to the manufacturer’s guidelines for any specific usage instructions or safety precautions.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
SPECIFICATION
4 X 6W MAX,LED,120V,60Hz (Dimmable LED Included)
INSTALLATION INSTRUCTION
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Loading......