Trudian TD-IS3204GF Non-POE Switch User Guide
- June 12, 2024
- Trudian
Table of Contents
Trudian TD-IS3204GF Non-POE Switch
Product Information
- Product Name: TD-IS3204GF
- Product Version: 1.0
- Applicable Model: TD-IS3204GF
- Date: August 2023
Product Features:
- Dual optical port uplink port, long-distance transmission, adaptable to various ring network/chain network cascading and expansion, making networking easier.
- Industrial-grade high-bandwidth switching chip, high backplane, large cache, reducing network congestion.
Product Specifications
Model| Port Characteristics| Network Port Characteristics| Optical Port
Characteristics| Chip Parameters| Power Characteristics
---|---|---|---|---|---
TD-IS3204GF| Fixed Downlink 4 10/100/1000Base-T RJ45 network ports
Uplink Port 2 1000M SFP optical port slots| Twisted pair transmission
1-4/1-8 ports 10/100/1000M adaptive, full/half duplex MDI/MDI-X
adaptive
10BASE-TCat3,4,5 UTP(100 meter)
100BASE-TXCat5 or later UTP(100 meter)
1000BASE-TCat5e or later UTP(100 meter)| Gigabit SFP optical fiber interface,
the default is not
equipped with optical modules, which need to be purchased
separately
(optional order mode/multimode, single fiber/dual fiber optical
modules, LC/SC)
fiber optic cable
Multi-mode 850nm 0550M
singlemode 1310nm 040KM
125m 50m/125m&62.5m/125m 1550nm0120KM 9.5m/| Network management type: Non-
network management
Network protocol: IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,
IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z
1000Base-X, IEEE802.3x Flow Control
Forwarding mode: Store-and-forward (full wire speed)
Backplane Bandwidth: 12Gbps (non-blocking)
Packet forwarding rate@64byte: 8.928Mpps
MAC address table: 2K
Packet forwarding cache: 2Mbits
Jumbo frame: 9.2Kbytes
Indicator light: Power indicator (PWR – green), Network indicator
(Link/Act – green), Optical port indicator (SFP – green)
MTBF: 500,000 hours| Input voltage: DC12-57V
Overall power: Standby power consumption
Product Usage Instructions
- Connect the fixed downlink ports (4 10/100/1000Base-T RJ45 network ports) to your devices using Ethernet cables.
- If required, connect external devices to the uplink ports (2 1000M SFP optical port slots) using compatible optical modules and fiber optic cables.
- Ensure that the input voltage is within the range of DC12-57V.
- Connect the power source to the product.
- Observe the indicator lights to check the power status (PWR – green), network activity (Link/Act – green), and optical port status (SFP – green).
Please refer to the full user manual for detailed instructions on configuring and utilizing the TD-IS3204GF switch.
Product Description
- TD-IS3204GF series unmanaged industrial Ethernet switches have 4 Gigabit Ethernet ports + 2 Gigabit uplink SFP optical port slots, and all ports support wire-speed forwarding.
- TD-IS3204GF completely complies with industrial product design and materials. The shell is made of aluminum alloy to enhance heat dissipation performance. It supports 6KV electrostatic surge protection, the protection level reaches IP40, supports dual DC redundant power supply, low power consumption fanless heat dissipation technology, MTBF average trouble-free working time can reach 35 years, and super long 5-year warranty. It is suitable for industrial scenarios such as intelligent transportation, rail transit, the electric power industry, mining, petroleum, shipping, metallurgy, pipe gallery and green energy construction to establish a cost-effective, stable and reliable communication network. Non-network management model, plug and play, no need to configure, easy to use;
Product Features
- Dual optical port uplink port, long-distance transmission, adaptable to various ring network/chain network cascading and expansion, making networking easier;
- Industrial-grade high-bandwidth switching chip, high backplane, large cache, reducing network congestion;
- Support IEEE802.3X full-duplex intelligent flow control, large stream high-definition transmission without lag;
- Support MAC address automatic learning and updating, support port automatic flip (Auto MDI/MDI-X) function;
- The service port supports 6KV anti-surge (lightning protection) protection, power short-circuit and overload protection, making it safer and more secure to use;
- Aluminum alloy profile metal shell, strong heat dissipation, shielding interference, strong, rust-proof and more durable;
- Dual DC redundant power supply interface, DC12-57V wide voltage input, meeting the wide voltage requirements of industrial environments;
- DIN35 guide rail installation, IP40 protection level, wide temperature design from -40°C to +75°C, more stable and reliable application in harsh environments;
- Low power consumption, fanless and silent design, plug and play, no configuration required, easy to use.
Product Specifications
| Model | TD-IS3204GF | TD-IS3208GF |
|---|
Port Characteristics
fixed port
| Downlink
port
|
4 10/100/1000Base-T RJ45 network ports
|
8 10/100/1000Base-T RJ45 network ports
Uplink
Port
|
2 1000M SFP optical port slots
Network port
characteristics
|
1-4/1-8 ports 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive
Twisted pair transmission
| 10BASE-T：Cat3,4,5 UTP(≤100 meter)
100BASE-TX：Cat5 or later UTP(≤100 meter) 1000BASE-T：Cat5e or later UTP(≤100 meter)
Optical port characteristics
| Gigabit SFP optical fiber interface, the default is not equipped with optical modules, which need to be purchased separately, (optional order mode/multimode, single
fiber/dual fiber optical modules, LC/SC)
fiber optic cable
| Multi-mode ：850nm 0～550M ， 50μm/125μm&62.5μm/125μm singlemode ：1310nm 0～40KM ， 1550nm 0～120KM 。9.5μm/
Chip parameters
Network
management type
|
Non-network management
Network protocol
| IEEE802.3 10BASE-T； IEEE802.3i 10Base-T； IEEE802.3u 100Base-TX；
IEEE802.3ab 1000Base-T； IEEE802.3z 1000Base-X；
IEEE802.3x Flow Control；
| forwarding mode | Store-and-forward (full wire speed) |
|---|
Backplane
Bandwidth
|
12Gbps (non-blocking)
|
20Gbps (non-blocking)
Packet forwarding
rate@64byte
|
8.928Mpps
|
14.88Mpps
MAC address
table
|
2K
|
8K
packet forwarding
cache
|
2Mbits
jumbo frame| 9.2Kbytes
indicator light
| Power indicator: PWR (green); Network indicator: Link/Act (green); Optical port
indicator: SFP (green).
MTBF| 500,000 hours
Power Characteristics
Input voltage| DC12-57V
Overall power
consumption
| Standby power consumption: <5W; full
load power consumption: <8W
| Standby power consumption: <8W; full
load power consumption: <10W
Supporting power
supply
| The power supply is not provided by default and needs to be purchased separately. It is
recommended to purchase DC24V/1A
Physical Specifications
Working
temperature/humi dity
|
-40～+75°C; 5%～90% RH non-condensing
storage temperature/humi
dity
|
-40～+85°C; 5%～95% RH non-condensing
Appearance size
(LWH)
|
1359535mm
|
15012548mm
Net weight/Gross
weight
|
＜0.5kg / ＜0.8kg
|
＜1.0kg / ＜1.3kg
installation
method
|
Desktop, DIN-rail installation
Product Certification
Lightning
Protection/Protec tion Level
|
Port lightning protection: 6KV 8/20us; protection level: IP40
Applicable industry standard
| IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-3 (RS): 10V/m (80~1000MHz)
IEC61000-4-4 (EFT): power line: ±4kV; data line: ±2kV
IEC61000-4-5 (Surge): power line: CM±4kV/DM±2kV; data line: ±4kV IEC61000-4-6 (radio frequency conduction): 10V (150kHz~80MHz)
IEC61000-4-8 (power frequency magnetic field): 100A/m continuous; 1000A/m, 1s to 3s IEC61000-4-9 (pulse magnetic field): 1000A/m
IEC61000-4-10 (damped oscillation): 30A/m 1MHz
IEC61000-4-12/18 (oscillating wave): CM 2.5kV, DM 1kV
| IEC61000-4-16 (common mode conduction): 30V continuous; 300V, 1s FCC Part 15/CISPR22 (EN55022): Class A
IEC61000-6-2 (general industry standard)
---|---
mechanical properties
| IEC60068-2-6 (anti-vibration)
IEC60068-2-27 (shock resistance) IEC60068-2-32 (free fall)
Safety
certification
|
CE，FCC， RoHS，CCC
Model
|
Device Information
| Recommended power supply
---|---|---
TD-IS3204GF
| Unmanaged 4 10/100/1000M network ports + 2 Gigabit uplink SFP optical port slots, industrial Ethernet switch, supports dual DC redundant power input (connected by Phoenix terminal), and supports DIN rail installation.|
24V/1A
TD-IS3208GF
| 8 unmanaged 10/100/1000M network ports + 2 Gigabit uplink SFP optical port slots, industrial Ethernet switch, support dual DC redundant power input (connected by Phoenix terminal), and support rail installation.|
24V/1A
- www.trudian.com/en/
- HQ Add: Farbell Technology Park, Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
- Phone: +86 0760 – 23689666
- E-mail:sales@trudian.com
- If the problem is not solved properly, please send the mail to:support@trudian.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>