Wantaike P9 Bone Conduction Sports Headphones User Guide

Bone conduction sports headphones
Operating guide

Important safety Tips

Please read the tips and instructions carefully and thoroughly before use.
Please attach this reminder and instruction manual when handing over the product to a third party.

Overview of key functions

A. Vocal unit: bone conduction vocal unit
B. Charging interface: magnetic charging interface
C. Luminous light: night running indicator
D. Indicator: Working indicator
E. Volume down/Previous track: Short press volume down and long press previous track
F. Key: Multifunctional key combination
G.Volume Plus/Next track: Short press volume plus and long press next track
H. MIC: microphone hole for a conversation
I. Decorative piece: decorative piece

Functional component overview

When the voltage of the headset is too Low, the red light blinks every five seconds and the voice message “Battery Low” or “Low Power” is displayed. At this time, please connect the power adapter to charge the earphone, otherwise the earphone will automatically shut down when the battery is too low.
After the earphone is charged through the magnetic data cable, the working indicator turns from red (stable on) to blue (stable on).
Note: Please use a DC 5V power adapter that meets the national standard and is certified by CCC for charging.

Bluetooth pairing

First startup pairing:
In the off state, long press the multi-function button for 3 seconds, the blue light is on for 1 second, the red/blue light flashes alternately, the headset is turned on, and the mobile phone Bluetooth pairing search state is directly entered. Then turn on your phone or Bluetooth device, find “P9” from the Bluetooth list, and tap Connect.

Operation Instructions

• Turn on the headset:
  In the off state, long press the multi-function button for 3 seconds, the blue light is on for 1 second, the red and blue lights flash alternately and accompanied by the “mechanical tone up” prompt tone, and the device that has been paired will automatically enter the pairing mode. The red and blue lights flash alternately, and the device that has been paired will automatically connect.

• Turn off the headset:
  In the startup state, long press the multi-function button for 3 seconds until the red light is steady on and accompanied by the “mechanical down” prompt tone.

• Answering the phone:
  When an incoming call is accompanied by the ring tone of the mobile phone itself, press the multi-function key to complete the answer;

• Hang up:
  During the call, press the multifunction button to hang up.

• Refuse to answer the phone:
  When an incoming call comes, long press the multifunction button to hang up.

• Disconnect and reconnect:
  When the distance between the earphone and the device exceeds the Bluetooth connection distance, the earphone is disconnected and a beep tone is played. If the earphone and the device are connected within 5 minutes, the earphone will be automatically connected and a beep tone will be played. If the earphone is not connected after 5 minutes, the earphone will shut down automatically.

• To play/pause music:
  When playing music, click the multi-function key to pause the music. The blue light flashes once every 10 seconds when the music is paused. When you pause the music, click the multifunction button to play the music. When the music is playing, the blue  light flashes once every five seconds.

• Next song:
  Short press the volume plus, and the volume will increase with the prompt tone. Long press the volume plus button to switch to the next song.

• Previous song:
  Short press volume reduction to reduce volume, long press volume reduction key to switch to the previous song.

• Wake up the voice assistant:
  In any startup state, hold down the multifunction button for 2 seconds and a beep tone is played. Wake up the voice assistant.

• Switch between Bluetooth mode and local storage mode:
  When the device is powered on, double-click the multifunction button to switch between Bluetooth Mode and music Mode in turn, and the Bluetooth Mode or Card Mode prompt tone is played

• Night running light mode on or off:
  In the startup state, the three-click multi-function button, night running light mode of steady on, blinking, off three modes switch.

• Mute/Undisable Mute call switching:
  During a call, hold down the Volume Plus button for one second and an announcement tone is played to enable or disable the mute mode.

• Chinese and English mode switching:
  In any startup state, press the multi-function key six times to switch between Chinese mode and English mode in turn, accompanied by the “Chinese Mode” or “English Language selected tone.

• Factory data reset:
  In any state, press the multifunction button five times to restart the headset after shutdown and restore the factory Settings

• How to copy Data:
  In any state, the data cable is inserted into the PC or mobile phone (with OTG adapter), read the U disk, and copy the required songs or data files to the device;

Points to note:

• Will power off automatically after 5 minutes without connecting to any mobile phone.
• Please fully charge the headset when using it for the first time.
• Before charging, wipe the sweat or moisture from the charging port toensure that it is dry and avoid short circuit.
• Do not soak the product in liquid.
• Please do not dismantle or repair this product for any reason, other wise it may lead to fire, electronic breakdown or even completely damage the product.
• If the charging is finished, please disconnect the charger from the headset, Continuous charging time should not exceed 12 hours.
• Please do not dispose of old batteries in household garbage.
• Improper disposal of batteries may cause battery fire. Please follow local regulations to dispose of this product, battery and its accessories.
• Batteries should not be exposed to excessive heat.
• Do not disassemble, impact, squeeze or put the battery into It is forbidden to disassemble, hit, crush or throw the battery into fire. Do not continue touse this product if the battery is severely swollen.
• Do not repair this product by yourself.
• Please use a DC 5V power adapter that meets the national standard and is certified by FCC,CE or UL to charge it.

Basic parameters

• Weight: Bare machine 32.5g
• Headset type: Night Run Swimming bone Conduction Bluetooth headset
• Headphone size: 140x110x48mm
• Connection version: V5.3
• Transmission distance: 10M
• Playing time: 6 hours
• Charging time: 1.5 hours
• Charging input: DC 5.0V 150mA
• Battery capacity: 150mAh
• Waterproof class: IP68

If the above still does not solve your problem,it is recommended to contact the dealer you bought in timeProvide you with technical support and after- sales service, thank you again for your support!
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>