CRYSTORAMA DEL-90803-MK Three Light Mini Chandelier Instruction Manual

CRYSTORAMA DEL-90803-MK Three Light Mini Chandelier

Product Information

The product is a lighting fixture model #DEL-90803-MK from Crystorama.com. It is a dry rated fixture suitable for indoor use. The fixture requires 3 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use. The product comes with crystal sets consisting of various bead strings and balls. The fixture is also accompanied by mounting hardware, a canopy, a fabric shade, candle sleeves, and other necessary components. The product is compliant with the National Electric Code and appropriate local electrical codes. All electrical components must be installed by a licensed electrician. There is a warning that the product contains Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, refer to www.p65warnings.ca.gov.

Product Usage Instructions

Hanging Installation

1. Screw the loop onto the top of the shade. Install the mounting plate onto the outlet box.
2. Decide the desired hanging height and adjust the chain to the correct length.
3. Raise the fixture up and make the wire connection. Attach the canopy over the mounting plate and secure it with ball nuts.
4. Dress the crystals as illustrated.

Ceiling Installation

1. Install the mounting plate onto the outlet box.
2. Remove the loop from the ceiling canopy.
3. Screw the coupling onto the top of the shade. Place the spacer over the shade by aligning the slots on it with the shade spoke. Place the canopy over the top of the spacer and secure it with the hex nut.
4. Dress the crystals as illustrated.

Ensure that the power is turned off before performing any electrical connections or installations. Follow the provided part numbers for the necessary components during installation.

ASSEMBLY INSTRUCTION

Crystal Sets

• A. 3 Sets. (2)14mm
• B.3 Sets. 280mm long bead string–(10mm bead*18pcs)
• C.3 Sets. 330mm long bead string–(10mm bead*21pcs)Crystal Sets
• D. 1 Piece. (1)AS8-40mm Ball
• E. 1 Piece. 260mm long bead string–(10mm bead*17pcs)

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes You will need 3- Candelabra Base Bulb40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED
USE The fixture is Dry rated

HOW TO INSTALL

Place the fixture parts on a soft cloth-covered platform before installation of the fixture.

For Hanging:

1. Screw the loop onto the top of the shade. Install the mounting plate onto the outlet box.
2. Decide the desired hanging height and adjust the chain to the correct length.
3. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure it with ball nuts.
4. Dress the crystals as illustrated.

For Ceiling:

1. Install the mounting plate onto the outlet box.
2. Remove the loop from the ceiling canopy
3. Screw the coupling onto the top of the shade. place the spacer over the shade by aligning the slots on it with the shade spoke. Place the canopy over the top of the spacer andand secure with the hex nut.
4. Dress the crystals as illustrated.

WARNING :This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov

Part Number

Part Numbers-For Hanging

• A.(1)Mounting hardware
  Wire Connector x 2.
  Mounting plate x 1.
  Machine screw x 2.
  Mounting screw x 2.
  Lock washer x 1.
  Hex nut x 1.
  Nipple x 1.

• B. (1)-Canopy (W5″xH1 1/4″)-XSN9083MKCAN5.11IN

• C. (2)-Ball Nut

• D. (1)-Loop

• E. (1)-Chain (4mmx72″)-XSN90803MKCHA4MM

• F. (1)-Fixture Loop

• G. (1)-Frame

• H. (1)-Distributor BoxH

• I. (1)-Center Finial

• J. (1)-Fabric Shade; W15.75″,H6″-XSN90803MKSHA15.75IN

• K. (3)-Candle Sleeve; W7/8″,H3 1/4″-XSN90802MKCDL3.23IN

• L. (3)-Crystal Bobeche; Ø2 3/8″,H3/8″; 23mm center hole.-XSN90802BOB2.4IN
  Part Numbers-Conversion kit For Ceiling

• M. (1)-Coupling

• N. (1)-Thread nipple

• O. (1)-Metal spacer ; H2″,with 3 slots

Crystorama.com

References

• Crystorama Lighting
• p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>