ingenuity Bouncity Bounce Vibrating Deluxe Bouncer Goji Instruction Manual

ingenuity Bouncity Bounce Vibrating Deluxe Bouncer Goji

IMPORTANT!
KEEP FOR FUTURE REFERENCE

WARNING

• FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers when not used properly.
• Use bouncer ONLY on the floor.
• NEVER use on an elevated surface. Only use on the floor.
• NEVER lift or carry baby in bouncer. • NEVER lift bouncer using a toy bar as a handle. SUFFOCATION HAZARD: Babies have suffocated when bouncers tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
•  NEVER leave baby unattended.

TO PREVENT FALLS AND SUFFOCATION:

• ALWAYS use restraints and adjust to fit snugly, even if baby falls asleep.
• STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
• Never let the child sleep in this product.
• NEVER use as an infant carrier for automobile or airline travel.
• NEVER attach any additional strings or straps to product or toy bar.

IMPORTANT

• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

• Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry.
• Do not immerse in water.
• Frame – Wipe the metal frame with soft, clean cloth and mild soap.
• Headrest – Fasten all hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Air dry flat.

Battery Information

The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture.

• Always keep batteries away from children.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.
  This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Parts List and Drawing

1. Base frame tube
2. Left base frame member
3. Right base frame member
4. Left backrest tube
5. Right backrest tube
6. Footrest wire
7. Vibration unit
8. Seat pad
9. Toy bar with toys
10. Headrest

INSTALLATION

Using the Seat Restraint

Using the Vibration Unit

To use the vibration function: Push the button to turn on or turn off the vibe unit.

Storage and Travel

To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside of each connecting hub on the bouncer. Remove the footrest tube and base frame tubes from each connecting hub.

Find us on Facebook and Instagram @ingenuitybaby
Retrouvez-nous sur Facebook et Instagram @ingenuitybaby

ingenuitybaby.com

MANUFACTURED FOR
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081 KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON, BEDFORDSHIRE, UK, LU1 3LU • +44 01582 816 080

References

• Ingenuity™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>