ZAQE V11 Mini Body Camera User Manual
- June 14, 2024
- ZAQE
Table of Contents
V11 Mini Body Camer
USER MANUAL
V11 Camcorder
Thank you for purchasing our music player.
Please read the manual carefully before using the device.
Instruction of Buttons
① CAM: video recording
② REC: voice recording
③ TF card slot: Max. 64GB
④ LED indicators:
Power indicator
Video indicator
Recording indicator| ⑤ Night vision ON/OFF
⑥ Power/Lights ON/OFF
⑦ RESET
⑧ Night vision infrared light
⑨ Back clip
⑩ Camera
⑪ USB port
---|---
If the device is dead, poke the reset hole with a needle to reset the device.
Charging
Please use a 5V 1000mAh power adapter that meets the standard.
Charging by connecting to a computer or wall charger are both OK, but charging
by computer takes longer time than wall charger.
Indicators
| LED Color | Blinking mode | Machine Status |
|---|---|---|
| Always on | Standby, Power ON, Charging(turns off when full charged) | |
| Blinking | Power OFF | |
| Fast flashing | Low Power | |
| Blinking | Voice Recording | |
| Blinking | Video Recording |
Turn ON/OFF
- Push up the power button and hold it for about 3 seconds, the indicator keeps red as below
- Push up the power button and hold on for about 3 seconds, the red indicator flashes and turns off, the device turns off.
Voice Recording & Save
To recording
Save the recording
Push up the REC button and start voice recording.
Push down the REC button to save the recording.
The indicator is blinking orange when recording.
To recording
Save the recording The indicator is blinking Blue when recording.
Push up the CAM button to start video recording, save it by pushing down the
button.
Turn Off the Indicator
When standby, recording or videotaping, push down the power button to turn off
the indicator.
Turn off the LED indicator
Synchronize the System Time
Connect this device with the computer, you will find the TXT file. 
Modify the
time and save it, then the system time of this voice recorder is synchronized
Note: If the battery is not charged for a long time, the system time will
recover, please reconnect the computer to modify the synchronization system
time!
Video Settings
| Watermark | Y: with time watermark | N: without time watermark |
|---|---|---|
| Clarity | 0: 1080P | 1: 720P |
| Cycle mode | Y: Circular Coverage | N: No circulation, no coverage |
| Image flip | normal | 180°flip |
Open the TXT file and modify the Y0Y0 according to your needs.
Note:
- The video settings only support the letters and numbers described above.
- When there is only about 1.5GB of memory left, the newest video will replace the oldest, and so on and so forth to ensure that the machine always has enough memory for recording. If you do not want the video be replaced, please set the cycle mode as N.
Connect to the Computer
As there is no internal memory on the device, please do make sure the memory
card has been inserted before you connect the voice recorder with the
computer.
Otherwise, the computer cannot detect the voice recorder!
When connecting the device to your computer, you may be asked to install the
driver. Just follow the instructions to complete.
If your computer prompts for a format, please choose FAT32 for the file to
format.
To avoid file system errors caused by formatting operations, we recommend to
clean up by deleting files!
OTG Connection and Playback
1.Before use, please note:
- Must have the OTG function on your phone!
- Must turn on the OTG function on your phone!
2.OTG Connection
Android
Connect the OTG cable with the mobile phone and the device, open the Files on
your phone. Select Browse, and you will find the device ZAQE V11. Hit the
device name to browse and play.
Attention: OTG function needs to be turned on manually on some mobile phones,
so be sure that you’ve turn it on. 
Apple
Connect the OTG cable with the mobile phone and the device, open the Files on
your phone. Select Browse, and you will find the device NO NAME. Hit the
device name to browse and play.
Attention: Most versions of Apple phones come with a file function. If
you can’t find or don’t have the file function, please search for the Files on
the “APP Store” to download and install it.
3.To Play a File
Android
After connecting to OTG with the phone, find the file in the folder “VIDEO”on
the file management page, select the file to play.
Apple
- After connecting to OTG with the phone, if you need to play the videos directly, please download and install the “OPLAY Video Player”from APP Store.
- Then, turn on the OTG function on your phone if needed.
- Open the “VIDEO” folder.
- Click on the file and select the share button at the bottom left corner.
- Select “OPLAY Video Player” to play.
OTG Connection and Playback
| Size | 87×29.5x17mm (Include the back clip) |
|---|---|
| USB port | USB 2.0 Type C |
| Battery | 3.7W500mAh Polymer lithium-ion |
| Battery life (full charged) | Voice recording |
| Video recording | ≈ 220 minutes (night vision OFF) |
≈100 minutes (night vision ON)
Recording Format| WAV| 256kbps
Video Format| AVI| 1920’1080P / 1280’720P
Max. Storage| Voice Recording| 2280 minutes
Video Recording| 540 minutes
Working Temperature| -5°C–40°C (23°F-104°F)
Supported OS| Windows 98 Second Edition/Millennium Edition/2000/XP/ Windows 7/
Windows 8/ Windows 10