PLANET Technology ICA-4480 Series IP Camera User Guide

H.265 PoE IP Camera
ICA-x80 series
Quick Installation Guide

Introduction

Thank you for purchasing PLANET H.265 PoE IP Camera. The “ICA-x80 series” is used as an alternative name in this Quick Installation Guide. The following is the ICA-x80 series:

Zoom
ICA-M4580P| H.265 5 Mega-pixel Smart IR Dome IP Camera with Remote Focus and Zoom

Package Contents

Open the box of the ICA-x80 series and carefully unpack it. The box should contain the following items:

• The IP Camera x 1
• Quick Start QR Code Sheet x 1
• Screw Package x 1
• Waterproof Connector Package x 1
• Drill Template x 1

If any item is found missing or damaged, please contact your local reseller for replacement.

Requirements

• Workstations running Windows 10/11, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols.
• Workstations are installed with Ethernet NIC (Network Interface Card).
• One IEEE 802.3af/at PoE switch (Supply power to the ICA-x80 series)
• Ethernet Port Connection
  Network cables — Use standard network (UTP) cables with RJ45 connectors.
  The above PC is installed with Web browser.

It is recommended to use Chrome to access the ICA-x80 series.
If the Web interface of the ICA-x80 series is not accessible, please turn off the anti-virus software or firewall and then try it again.

Starting Web Management

The following shows how to start up the Web Management of the ICA-x80 series. Note the ICA-x80 series is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.

1. The ICA-x80 series supports IEEE 802.3af/at standard; be reminded to power either from AC to DC adapter or 802.3af/at PoE switch.
2. The AC to DC adapter is not included in the package.

For example, the ICA-x80 series default network type is DHCP Client; to search the current IP address of the ICA-x80 series, follow the procedure below:

1. Download the “PLANET Search Tools” utility from the following PLANET website link: http://www.planet.com.tw/en/support/downloads?method=key word&keyword=PLANET+Search+Tools&view=6#list

2. Install the “PLANET Search Tools” utility.

3. After the camera utility is launched, all cameras found in your local area network will be displayed.

4. The existing ICA-x80 series in the local network.

5. Search the ICA-x80 series in the network.

6. Modify the IP parameters of the selected ICA-x80 series.

7. Select the ICA-x80 series you want to configure and double-click on it.

8. You will be connected to the ICA-x80 series via web browser automatically.
   

9. Without DHCP server, the ICA-x80 series default IP address is 192.168.0.20, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 20), and the default subnet mask is 255.255.255.0.

4.1 Logging in to the ICA-x80 Series

1. When the following dialog box appears, please enter the default user name and password “admin”. The login screen in Figure 4-3 appears.
   Default IP Address: DHCP client, fallback IP address 192.168.0.20
   Default Username: admin
   Default Password: admin
   The following web screen based on ICA-3480F will be the same as that of ICA-x80 series.

2. After entering the username and password, the main screen appears as Figure 4-4 and Figure 4-5 show.
   Figure 4-5 is for ICA-M3580P / ICA-M4580P only.

Now, you can use the Web management interface to continue the ICA-x80 series management.
Please refer to the user’s manual for more.

Recovering Back to Default Configuration

IP Address has been changed or admin password has been forgotten –
To reset the network type to the default “DHCP Client” with IP address “192.168.0.20” or reset the login password to default value, press the hardware-based reset button for about 10 seconds. After the ICA-x80 series is rebooted, you can  log in the management Web interface within the factory default mode.

For ICA-3280 / ICA-4280 / ICA-3480 / ICA-4480 / ICA-3480F / ICA-4480F only.

Only ICA-M3580P and ICA-M4580P can support SD card slot.

Customer Support

Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team.
PLANET online FAQs: http://www.planet.com.tw/en/support/faq?method=category&c1=8
Support team mail address: support@planet.com.tw
ICA-x80 Series User’s Manual: https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=ICA-x80+series&view=3#list

https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=ICA-x80+series&view=3#list

Android APP

https://play.google.com/store/search?q=bitvision

IOS APP

https://itunes.apple.com/app/id1419463554

Copyright © PLANET Technology Corp. 2023.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>