CP Electronics EBMPIR-MB-B-BP Mini PIR Detector for Luminaire Installation Guide
- October 31, 2023
- CP electronics
Table of Contents
- CP Electronics EBMPIR-MB-B-BP Mini PIR Detector for Luminaire
- Product Information
- Instructions
- Dimensions (mm)
- Downloads and Videos
- Wiring
- Detection pattern
- Walk towards & walk across explained
- Standard luminaire fitting
- IP luminaire fitting | IP-Leuchtenausstattung
- Default Settings
- Technical Data
- Testing
- Accessories & associated products
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CP Electronics EBMPIR-MB-B-BP Mini PIR Detector for Luminaire
Product Information
- Product Name: Mini PIR Detector for Luminaire Integration (Batten Mount)
- Model: EBMPIR-MB-B-BP
- Weight: 0.100 kg
- Supply Voltage: 230 VAC +/- 10% at 50Hz
- Parasitic Power Consumption: 807mW
- Max Load: 2A
- Humidity Range: 5% to 95% (non-condensing)
- Material (Casing): Flame-retardant ABS/PC
- IP Rating: IP65
- Compliance: EMC-2014/30/EU, LVD2014/35/EU Product Usage
Instructions
-
Installation: – This device should be installed by a qualified electrician in accordance with the latest edition of the IEE wiring regulations. – Use a M20 x 1.5 nut and IP spacer for mounting the device. – Mount the device with the key, ensuring that the key is
at the top of the sensor. – If the luminaire has a draft angle, use spacers for proper installation. -
Wiring: – Connect the neutral wire to Key 1. – Connect the live wire to Key 2. – If required, connect a 10A circuit protection to Key
-
Connect the load to Key 4. 3. Settings: – Time out: The device has a fixed time out of 10 minutes. – LUX on level: Set the Lux level at which the device turns on to 9. – LUX off level: Set the Lux level at which the device turns off to 9. – Sensitivity: Set the sensitivity level to 9. – Detection: The device detects presence. Note: For detailed installation and wiring instructions, refer to the user manual
available at cpelectronics.co.uk/cp/993
Basic switching, miniature, luminaire mounted, PIR, presence detector (20 pack)
Warning
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE wiring regulations.
Dimensions (mm)
Downloads and Videos
Wiring
Key
- Neutral
- Live
- 10A circuit protection if required
- Load
Detection pattern
Walk across
Walk towards
Walk towards & walk across explained
Standard luminaire fitting
Wire in plugs & connect to detector
Key
- M20 nut
- IP spacer
IP luminaire fitting | IP-Leuchtenausstattung
Wire in plugs & connect to detector
Key
- M20 nut
- 5° washer (optional)
- Silicone washer
- IP spacer
Default Settings
- Time out: Fixed 10 minutes only.
- LUX on level: 9
- LUX off level: 9
- Sensitivity: 9
- Detection: Presence
Technical Data
| Device | EBMPIR-MB-B- BP |
|---|---|
| Weight kg | 0.100 |
| Supply voltage AC at 50Hz | 230 VAC +/- 10% |
| Parasitic power consumption mW | 807mW |
| Max load: | |
| Incandescent lighting | 2A |
| Fluorescent lighting | 2A |
| Compact fluorescent lighting | 2A |
| LED lighting | 2A |
| Operational temp. ºC | -10 to 50°C |
| Humidity | 5 to 95% non- condensing |
Testing
- Power up the sensor. The load should come on immediately.
- Vacate the room or remain very still and wait for the load to switch off (this should take less than 20 minutes).
- Enter the room or make some movement and check that the load switches on.
Presence Detection
Accessories & associated products
CP Electronics
A Business unit of Legrand Electric Limited,
Brent Crescent, London NW10 7XR, UK
t.+44 (0)333 900 0671
[email protected]
connect with us