BOYA BY-V Ultracompact 2.4GHz Wireless Microphone System User Manual

BOYA BY-V Ultracompact 2.4GHz Wireless Microphone System User Manual

Packing List

BY-V1

• BY-V1-TX Transmitter X1
• BY-V1-RX Receiver X1
• USB-C Charging Cable x1
• Foam Windscreen x1

BY-V10

• BY-V1-TX Transmitter X1
• BY-V10-RX Receiver X1
• USB-C Charging Cable x1
• Foam Windscreen x1

BY-V2

• BY-V2-TX Transmitter X2
• BY-V2-RX Receiver X1
• USB-C Charging Cable X2
• Foam Windscreen x2

BY-V20

• BY-V2-TX Transmitter x2
• BY-V20-RX Receiver X1
• USB-C Charging Cable x2
• Foam Windscreen x2

Product Structure

BY-V1-TX/BY-V2-TX: Wireless Transmitter

1. Built-in Microphone
2. Status Indicator
   ** Status| Indicator**
   ---|---
   Unpaired| Blinking blue and red alternately
   Paired Successfully| Static blue
   Mute| Blinking blue
   Noise Reduction ON| Static green
   Low Battery| Blinking redStatic red
   Charging
   Fully Charged| Red light off

Note:

1. If charging the unit when it is ON, the indicator will display the current working status instead of charging status.
2. Please charge the transmitter in time when in a low battery status, or it will auto shut off within 10 mins.
3. The function of noise reduction cannot be turned on or off in mute mode.

3. NR Button
   Press to turn on or off the function of noise reduction.

4. Power Button

   • Press and hold for 2 seconds to power on or off.
   • Press to mute or unmute the microphone.

5. Belt Clip
   It can rotate 360 degrees.

6. USB-C Charging Port
   For charging the transmitter.

7. Foam Windscreen

BY-V1-RX/BY-V2-RX: Compact Receiver with Lightning Connector

1. Status Indicator
   ** Status| Indicator**
   ---|---
   Unpaired| Blinking blue
   Paired Successfully| Static blue

2. MFI Certified Lightning Connector
   It can be connected to an iOS Lightning device.

3. USB-C Charging Port
   When the BY-V1-RX or BY-V2-RX is plugged into an external device, the external device can be powered via this charging port.
   Note:
   iPhones and iPads can be powered and charged through this port while in use, which also supports up to 3A charging current.

BY-V10-RX/BY-V20-RX: Compact Receiver with USB-C Connector

1. Status Indicator
   ** Status| Indicator**
   ---|---
   Unpaired| Blinking blue
   Paired Successfully| Static blue

2. USB-C Connector
   It can be connected to an Android Smartphone, Tablet, Computer and other USB-C devices.

3. USB-C Charging Port
   When the BY-V10-RX or BY-V20-RX is plugged into an external device, the external device can be powered via this charging port.
   Note:
   Most USB-C devices can be powered and charged through this port while in use.

How to use

For the kit of BY-V1/BY-V10

1. Press and hold the power button for 2 seconds to turn on the BY-V1-TX transmitter.
2. Plug the BY-V1-RX into an iOS Lightning device or the BY-V10-RX into a USB-C device.
3. Transmitter and receiver will be successfully paired within 10 seconds.
4. You are ready to record.

For the kit of BY-V2/BY-V20

1. Press and hold the power button for 2 seconds to turn on two BY-V2-TX transmitters.
2. Plug the BY-V2-RX into an iOS Lightning device or the BY-V20-RX into a USB-C device.
3. Transmitters and receiver will be successfully paired within 10 seconds.
4. You are ready to record.

Note:
Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.

Specification

BY-V1-RX/ BY-V2-RX: 6g
BY-V10-RX/ BY-V20-RX: 6g
Dimensions| BY-V1-TX/ BY-V2-TX: 52.22×25.23×19.75mm
BY-V1-RX/ BY-V2-RX: 43.92×23.5×9.3mm
BY-V10-RX/ BY-V20-RX: 43.92×24.7×9.3mm

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd.
TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com/www.jiayz.com

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>