maxwest MXD200 Desk phone User Guide

Know Your Phone
7MX-D200 User Guide

Key Instruction

· Performs the function indicated at the left bottom of the screen.

2. Number| · Use these keys to enter numbers and characters.
**3. # , *| ·Perform different functions under different conditions.
Key| Description
---|---
4. Scrolling| ·Press these keys to scroll cursor to the left, right, up or
down when inputting characters or selecting items.·Default functions in standby mode are set in the Settings menu.
5. NAM ES/BACK**| · To return to upper menu, or cancel

·Enter the Phonebook in Idle screen

6. EXIT| ·To turn ON/OFF the unite
7. MUTE| ·To mute the voice while communication
8.M MESSAGE| ·This is the shortcut key to enter the message menu in standby mode.
9. CALL/REDIAL| ·Make a call or answer an incoming call.

·In standby mode, press this key to enter Dialed calls list.

10. HANDS-FREE| ·If you are using the handset to call and want to transfer the call to the speakerphone, press this key and hang up the handset to put the conversation on the speakerphone. ·  Press this key to end a hands- free call.

Notes: In this manual, “press” a key means to press the key once, “hold” a key means to press the key for 2 or 3 seconds

Interface Icons

Installation

1. Handset Connect phone and handset via the phone cord.

2. External power adapter
   Plug the external power adapter to the external AC socket.

3. SIM card
   Always switch the phone off before removing or inserting a SIM card. Open the bottom cover of the battery. Remove the battery, slide the SIM card into the SIM card slot. Make sure that the contact area of the card is facing down, and the beveled corner matches with the SIM card slot. Put in the battery and install the bottom cover.

How to Power on/of
To power on the phone, connect the phone and external power outlet with the power adapter and then hold the EXIT key till the phone is powered on.
To power off the phone, at standby mode, hold the EXIT key till the phone is powered off.
Notes: It is strongly recommended to connect the phone to an external power outlet, and use an internal battery to power your phone only when external power falls or is not available. The phone will charge the internal battery automatically when It is connected to an external power outlet.
How to Make a Call
There are two methods for making a call.
The first method:
1Pick up the handset or press the HANDS-FREE key.
2. Enter the phone number, press the CALIJREDIAL key to make the call. The second method: Enter the number or select recipient’s number from Contacts, or press CALUREDIAL key to select a number from the Dialed calls list, then press CALL/REDIAL key to making the call.
Notes: Add the international prefix, country code, and area code (without the leading 0) before the number when making an international call.

Message

Select Write a message to write a message, Press Options select Send or Save.Select Messaging in Menu

• Select Inbox to view messages received.
• Select Outbox to view the failure messages.
• Select Drafts to view the drafts messages.
• Select the Sent box to view the successfully sent messages.
• Select Templates to View the template message
• Select a Broadcast message to hear the message.
• Select Voice mail server to hear the message.
• Select SMS setting to make some necessary short message settings.
• Select Message capacity under SMS settings to View the message of saved entries and a maximum number of entries capacity in phone and SIM.

**Security setting

**

Security settings could prevent your phone from unauthorized use. The default phone code is 1122. Change it to your own as soon as possible.
If you change the default phone code to a new one. remember it or place it at a secure place.

PIN Code and PUK Code

• PIN code: A PIN code could prevent your SIM card from illegal use. When PIN code is enabled, you should enter the PIN code when powering on the phone again. Change the default PIN code to your own as soon as possible.
• UK code: The SIM card will be locked if you enter a wrong PIN code consecutively for three times. To unlock, you need a PUK code.

Notes: PIN code and PUK code may be offered together with the SIM card.

Text Input

directly. Press # key.
Input letters| “Abc”, “abc”, “ABC”, press corresponding letter key till the letter appears. Press # key.
Input words| “=ABC”, “=abc”, press the Number keys to input the characters of the word. Then press the MENU/SELECT key to confirm.
Input symbol| Press * key, and then select the corresponding symbol by using Scrolling keys.
Input space| Apart from Numbers input mode, press “0” key to add space.
Operation| Method
---|---
Erase character| Press the NAMES/BACK key. Hold NAMES/BACK key until the cursor before the character be erased.
Move the cursor| Press Scrolling keys.
Change input mode| Press # key to change text input mode.

Menu Function

Hereinafter are brief instructions for the menu functions of the phone.

message
Read message| Read message in Inbox, Outbox, Drafts, Sent box.| Menu(Messaging(Inbox
/Outbox/Drafts/Sent box
Function| Description| Selection
---|---|---
Message settings| Make some necessary short message settings.| Menu—.Message — SMS settings
Call history| View or dial all recent calls.| Menu—Call logs—. Missed calls /Dialed calls/Received calls /Delete call/Call times
Call duration| Check the Last call, Received calls, Dialed calls or Call history duration.| Menu—. Call logs—.Missed calls /Dialed calls/Recelved calls
— Options—•Scrolling to view)
Phonetook| View contacts| Menu—Contacts
Add new contact| Save phone number.| Menu—Contacts —Options—Select
Speed dial list| Set and view speed dial list.| Menu—Contacts—Cptions —.Others—. Speed dial
Call divert| Specify the conditions under which the call types should be diverted to another number.| Menu—. Settings
—. Call settings— Call divert
Function| Description| Selection
---|---|---
Call waiting| Put the current call on hold to answer the other incoming call.| Menu— Settings—. Call settings —.Call waiting
Call barring| Restrict the dialing or receiving of certain calls.| Menu—.Settings
—Call settings—Call barring
Post-dialing delay| Enter the call number and delay expiration.| Menu—Settings—Phone settings —.Post-dialing delay
Time and date| Check the date and
the time, and set the date and the time format| Menu—Settings —Phone settings —.clate&time
Language| Set the display language| Menu—.Setfings—.Phone settings —, Language settings
Ring settings| Caller ringtone /Message ringtone| Menu—Profiles
—• Ring settings —Caller ringtone /Message ringtone
Function| Description| Selection
---|---|---
Backlight| Set the backlight time, when using the phone.| Menu—. Settings—. Display —LCD backlight
Change PIN| Set or change the PIN code| Menu —.Settings —Security
—.PIN
—Change PIN
Change password| Set or change the phone lock code.| Menu—Settings
—. Security
—Tower-on password
Restore settings| Switch to the factory default settings. The phone will dew input password, the password default 0000.| Menu—.Settings—.Phone setting —.Restore factory settings
Adjust volume| Set Caller/Message /AlamVCall/Power
ringtone of your phone.| Menu—. Profiles —.Adjust volume
Ring type| Set Ringer Tone| Menu—. Profiles—. Ring type CalVMessage alert
/ Alarm remind
Calculator| Execute basic math calculations.| Menu—Tools—Calculator (press •• • *to select +-I)
Alarm clock| Set alarm clock.| Menu—. Tools—. Alarm

Warning and Maintenance

• Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately shielded. Keep using the phone at least 20 cm or as far away as you can from TV sets, radio and other automated office equipment so as to avoid electromagnetic interference.
• Operating the phone may interfere with medical devices like hearing aids and pacemakers, or other medical devices in the hospital. Consult a physician or the manufacturer of the medical device before using the phone.
• Be aware of the usage limitation when using the phone at places such as oil warehouses, or chemical factories, where there are explosive gases or explosive products being processed because even if your phone is in idle state, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required.
• Do not touch the antenna while calling. Otherwise, it will affect the quality of calling and waste battery energy. The damaged antenna will cause slight burn while touching your skin.
• Keep the antenna free from obstructions and position the antenna straight up. This will ensure the best call quality.
• Keep the phone out of the reach of small children. The phone may cause injury if used as a toy.
• Do not put other things on the terminal to avoid overlaying the radiator.
• Use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body.
• As your phone can produce an electromagnetic field, do not place it near magnetic items such as computer disks.
• Do not expose your phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices
• Prevent liquid from leaking into your phone.
• Disconnect the external power supply and do not use your phone during thunderstorms.
• Unplug the external power adapter or remove the battery when your phone is not in use, esp. for a long period of time.
• It is highly recommended to charge the battery before initial use. The battery might have been discharged during storage and delivery.
• Do not unplug the connector of the data cable from the phone, and not install or remove the battery, when the power is on.
• Do not attempt to disassemble the phone by yourself. Non-expert handling of the devices may damage them.
• The phone is non-waterproof, keep it dry and store in a shady and cool place.
• If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean your phones, such as alcohol, dilution agent and benzene. Power off your phone before you clean it.

Troubleshooting

If your phone appears following phenomenon in the process of application, read the following relative information at rst. If the problems still cannot be solved, please contact with the distributor or service provider.

which o ered with SIM card together. If you have changed the PIN code, input the new PIN code.
When switching on the phone, it prompts “Emergency”.| Check whether a valid SIM card is inserted or not.
When switching on the phone, it prompts you to enter “password”.| Enter lock code you set already to unlock the phone.
No ring tone prompt for an incoming call.| Check the volume setting of ring tone. And check whether “mute” is set in Pro les.
No display on the screen when disconnecting the external power supply.| Check whether the battery has electricity, or it is damaged or power on the phone again.
Press CALL/REDIAL key, but no number is sent.| Check whether you have set call barring.
Problem| Check Point
---|---
The certain call cannot be received.| Check whether the numbers restricted.
Cannot send short messages.| Check the network condition, or message center setting.
Another abnormal phenomenon.| First refer to the user manual, and then check whether the power is
connected correctly or not. If there is no problem, restart the phone.

Calentamiento

■ Cualquler cambio o modificaclon no aprobados expresamente por Ia parte responsable del cumplimiento podrian anular Ia autoridad del usuario para utilizer los equipamiento. Este dispositivo cumple con la parte 15 de las normas de Ia FCC. La operaciOn esta sujeta a las siguientes dos condiciones: (1) Este dispositivo no puede causar interferencias perjudiciales y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencias que puedan causar un funcionamiento no deseado.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>