PARSONVER FF1 Smart Watch User Manual

PARSONVER FF1 Smart Watch

Product Information

Model number : FF1

Support Email: support@parsonver.com

Product Usage Instructions

Turning On the Watch

To turn on the watch, press and hold the side power button.

Note: For the first use, please charge the watch for at least 5 minutes before turning it on. It takes about 2 hours to fully charge the watch.

Downloading the App

• Power on the watch.
• Click to select the desired language.
• Scan the QR code of the watch.
• Download the GloryFit app:
  • For iOS: Apple App Store
  • For Android:
    Google Play Store

Turning On/Off Call Audio

To turn on call audio, ensure that the upper left corner of the watch screen shows it is on. This allows you to answer and dial calls.

If the upper left corner is in a gray state, follow these steps:

1. Click to turn off call audio.
2. Click to turn it on again and check if it is on.
3. On your mobile phone, find Settings, click Bluetooth, and
   connect to the Bluetooth name of the watch (Parsonver FF1).

Menu Navigation

The watch menu can be accessed through various swipe gestures and button presses:

• Swipe Up: Enter message interface.
• Swipe Right: Enter recently used menu interface.
• Swipe Left: Enter daily exercise, sleep, heart rate, blood oxygen, and weather interfaces.
• Press the side button when the screen is on: Enter menu interface.
• Press and hold the main interface to select the watch face.
• Single click the side button: Go back to the previous interface.
• Press and hold the side button for about 3 seconds: Shut down the watch.

Settings

Watch Face & Theme

To choose a dial and theme:

1. Enter Setting Mode.
2. Select Dial and Theme.
3. Click the side button to return to the previous interface.

Sound & Vibration

To adjust sound and vibration settings:

• Set Vibration intensity.
• Turn on Media audio to sync sound playback from your mobile phone, such as voice assistant and music playback.
• Note: Make sure to turn off the media audio of the watch before using the Find Phone feature.

Brightness

To adjust brightness and screen time:

• Set the desired brightness level.
• Set the screen time.

Raise to Wake

To turn on/off Raise to wake:

• Enable or disable Raise to wake feature.

Password

To set or reset the watch password:

• Set Password Switch.
• If you forget the password, reset the watch to factory settings in the mobile app.

Do Not Disturb

To set the start time and end time of Do Not Disturb mode:

• Configure the desired start and end times for Do Not Disturb mode.

QR Code

To connect to the watch or download the app, scan the QR code.

System Info

In the System menu, you can find the following options:

• Reboot: Restart the watch.
• Power off: Turn off the watch.
• Reset the watch: Reset the watch to its default settings.
• Check Device name, Device version, Bluetooth address.

Daily Exercise

To check your daily exercise data:

• Swipe down on the interface to view Calories, Distance, and Steps (Step details and Weekly data).

Heart Rate

To monitor your heart rate:

• Monitor heart rate.
• Slide down on the interface to view the heart rate change chart for a week.
• Note: To view the 24-hour real-time heart rate change graph, open the app and navigate to Device > Heart rate settings. Turn on Automatic and Maximum heart rate reminder. When the heart rate exceeds the set value, the device will vibrate to remind you.

Training

To choose a training mode and view training data:

• Choose a training mode.
• Swipe down on the interface to view training time, heart rate, steps, calories, etc.
• Swipe right to continue or exit training mode.
• Swipe left to enter the music control interface.

Blood Oxygen

To monitor your blood oxygen level:

• Monitor blood oxygen.
• View the 24-hour blood oxygen change graph by opening the app and navigating to Device > Blood oxygen setting. Turn on Automatic setting and set Time period and Cycle.

Press and hold the side power button to turn on the watch
Note: For first use, please charge the watch for 5 minutes, or it may not be turned on. And it takes about 2 hours to fully charge the watch.

Download App

Power on – Click to select the language – Scan the QR code of the watch – Download “GloryFit” app
For iOS: Apple App Store
For Android: Google Play Store

Pair with Watch

1. Open the app, register and log in to your account.
2. Click the third small icon “Device” at the bottom of the page -Click “Add a new device”
   Click in the upper right corner – Scan the QR code on the watch (Settings – QR Code) – on the App “FF1(ID-****) would like to pair with your phone.” that pops up, select “Pair” – to achieve a successful con-nection (Bluetooth Name: Parsonver FF1 )

Note:

1. Turn on the Bluetooth on the mobile phone.
2. Reset the watch when no Bluetooth signal found.

3. Need to enter the app to pair the watch, cannot con-nect to the Bluetooth in the phone settings.
4. When the Bluetooth is successfully connected, the main interface pulls down and the sign in the upper left corner is on, if there is no connection, the sign in the upper left corner is a gray state.
5. Click the third small icon “Device” at the bottom of the page – Click “More settings” – Click “Device language” to set the language of the watch.

Basic Operation

Swipe Down to access quick settings.

Turn on/off call audio
Note: Turn on call audio, in the upper left corner is on, can answer and dial calls.
If in the upper left corner is a gray state,

1. Click to turn off call audio, then turn it on again, and check on.
2. Need to find “Settings” on the mobile phone – Click “Bluetooth” – Find the Bluetooth name of the watch “Parsonver FF1” – Click to connect

3. Swipe Up to enter message interface.
4. Swipe Right to enter recently used menu interface.
5. Swipe Left to enter daily exercise, sleep, heart rate, blood oxygen, weather interface.
6. When the screen is on, press the side button to enter menu interface.
7. Press and hold the main interface to select the watch face.
8. Single click the side button can back to the previous interface.
9. Press and hold the side button for about 3 seconds to shut down.

Setting Mode

• Watch face & Theme
  Choose “Dial” and “Theme”, and click the side button to return to the previous interface.

• Sound & vibration
  Set “Vibration” intensity, turn on “Media audio” and turn on “Mute” mode.
  Note: When turning on media audio, the watch can sync all sound playback of mobile phone, such as voice as-sistant and music playback.

• Bright
  Set the brightness and screen time.

• Raise to wake
  Turn on/off “Raise to wake”.

• Password
  Set “Password Switch”, when forgetting password, please reset the watch to factory settings in the mobile APP.

• Do not disturb
  Set the start time and end time of “Do not disturb” mode.

• System
  “Reboot”, “Power off”, “Re-set” the watch.

• QR Code
  Scan to connect to the watch or download the APP.

• Info
  Check “Device name”, “Device version”, “Bluetooth address”.

Press the side button to enter the menu to see more functions when the screen is on

Call
You can select “Contacts” or use “Dial Pad” to dial calls. And you can check “Call Logs” on the watch.

Note: Click to hang up, click to adjust the volume, click to turn on/off microphone. The other party can hear you when the microphone is on, but cannot hear you when the microphone is off.

Contact Person setting
Open the app – Click the third small icon “Device” at the bottom – Click “Bluetooth Call” – Click “Sync Contacts” – Click “Open” – on the App “GloryFit” Would Like to Access Your Contacts that pops up and select “OK” to sync contacts to the watch.

Daily Exercise
Swipe down on the interface can check “Calories”, “Dis-tance”, “Steps”(Step details and Weekly data).

• Heart Rate
  Monitor heart rate, and slide down on the interface to view heart rate change chart for a week
  Note: To view the 24-hour real-time heart rate change graph, open the app and find the third small icon “De-vice” at the bottom of the page – Click “Heart rate set-tings” – Turn on “Automatic” and “Maximum heart rate reminder”, when the heart rate is more than this value, the device will vibrate to remind you.

• Training
  Choose a training mode, swipe down on the interface to view training time, heart rate, steps, calories, etc., swipe right to continue/exit training mode, swipe left to enter music control interface.

• Blood Oxygen
  Monitor blood oxygen and view the 24-hour blood oxygen change graph, open the app and find the third small icon “Device” at the bottom of the page – Click
  “Blood oxygen setting” – Turn on “Automatic setting” and set “Time period” and “Cycle”.

• Sleep
  Monitor sleep data, slide down on the interface to view deep sleep, light sleep, awake time, and REM(rapid eye movement).

• Weather
  Check the weather, swipe down on the interface to view future weather for next three days.

• Alarm Clock
  Click “+” to choose “Time” and “Repeat” , and swipe right on the interface to save the alarm clock after setting.

• Voice Assistant
  Click to wake up the voice assistant
  Note: Need to turn on “Media audio” on Settings of the watch.

• SOS
  Open the app – Click the third small icon “Device” at the bottom – Click “SOS Contact” to set

• Female Health
  Open the app – Click the fourth small icon “Profile” at the bottom – Click “Physiological cycle” to set reminders Note:When registering an account, the gender must be female.
  Open the app – Click the fourth small icon “Profile” at the bottom – Click on the avatar to set personal information

• Shake to Take Picture
  Open the app – Click the third small icon “Device” at the bottom – Click “More settings” – Click “Shake to take picture” to enter photograph function

• SMS
  Open the app – Click the third small icon “Device” at the bottom – Turn on message notification
  Note: The watch cannot reply text messages.

Charge

For charging, please place the watch flat, and make sure the metal holes on the back are aligned with the metal tip of the charging head (charging contact spac-ing: 4mm).

Note:

1. The rated voltage of the charging head is 5V/0.5A.
2. Please do not use the vehicle power supply to charge, to avoid causing the charging cable to age or burn out due to the unstable voltage.

Replace the watchband

Slide the switch of the watch-band, and replace the same specification(watchband width: 22mm).

Precautions

1. Please clean your watch regularly.
2. Please do not wear it too tight to avoid discomfort.
3. Please do not use for swimming. When getting wet, be sure to dry the water on the watch before operating.

Specifications

Model Num-

ber

| FF1| Display| 1.91inch TFT
---|---|---|---
Resolution| 240*296px| Bluetooth| 5.2
Battery

Capacity

| 320mAh| Working

Time

| 5-7 days
Working Tempera-

ture

| 0 – 45°C| Storage Tempera-

ture

| -10 – 50°C
Rated Volt-

age

| 3.8V| Rated Cur-

rent

| 190mA
Compatible System| Android 5.0 or above / iOS 10.0 or above

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two condi-tions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-aged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dif-ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-cian for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Op-eration is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired op-eration.

Model number: FF1

UK RP OCEAN SUPPORT LTD
Info@topouxun.com
© Amber, Office 119, Luminous House 300 South Row, Milton keynes, MK9 2FR

EC…REP UE Fast Refund GmbH

• ue-de@foxmail.com
• +4994175083048
  O Friedrich-Alfred-Straße 184 Duisburg 47226 Deutschland
  MADE IN CHIN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>