PARSONVER FF1 Smartwatch User Manual

FF1 Smartwatch
User Manual EN (02-08) FR (09-16) DE (17-24)
ES (25-31) IT (32-39) JP (40-47)
Model number: FF1
[email protected]

FF1 Smartwatch

Press and hold the side power button to turn on the watch
Note: For first use, please charge the watch for 5 minutes, or it may not be turned on. And it takes about 2 hours to fully charge the watch.

Download App

Power on – Click to select the language – Scan the QR code of the watch – Download “GloryFit” app For i0S: Apple App Store For Android: Google Play Store

|
https://play.google.com/store/apps/details?id=com.yc.gloryfit| https://itunes.apple.com/cn/app/id1237479843

Pair with Watch

1. Open the app, register and log in to your account.
2. Click the third small icon “Device” at the bottom of the page-Click “Add a new device” – Click in the upper right corner – Scan the QR code on the watch (Settings – QR Col- on the App “FF10D-** would like to pair with your phone.” that pops up, select “Pair”- to achieve a successful con-nection (Bluetooth Name: Parsonver FF1)
   Note:
   ** 1) Turn on the Bluetooth on the mobile phone.

2. Reset the watch when no Bluetooth signal found.
   3)Need to enter the app to pair the watch, cannot connect to the Bluetooth in the phone settings.
   4)When the Bluetooth is successfully connected, the main interface pulls down and the signoo in the upper left corner is on, if there is no connection, the signopin the upper left corner is a gray state.
   5)Click the third small icon “Device” at the bottom of the page- Click “More settings”- Click “Device language” to set the language of the watch.

Basic operation

1. Swipe Down to access quick settings.
   Turn on/off call audio
   Note: Turn on call audio, in the upper left corner is on, can answer and dial calls. If in the upper left corner is a gray state,
   1 )Click to turn off call audio, then turn it on again, and check on.
   2)Need to find “Settings” on the mobile phone – Click “Bluetooth”- Find the Bluetooth name of the watch “Parsonver FF1”- Click to connect
   Menu type
   Mute mode
   Raise to wake
   Flashlight
   Settings
   Do not disturb
   Brightness adjustment
   Find phone
   Note: Need to turn off the media audio of the watch.
   Scan to connect to the watch or down-load the APP

2. Swipe Up to enter message interface.

3. Swipe Right to enter recently used menu interface.

4. Swipe Left to enter daily exercise, sleep, heart rate, blood oxygen, weather interface.

5. When the screen is on, press the side button to enter menu interface.

6. Press and hold the main interface to select the watch face.

7. Single click the side button can back to the previous interface.

8. Press and hold the side button for about 3 seconds to shut down.

Setting Mode
Watch face & Theme
Choose “Dial” and “Theme”, and click the side button to return to the previous interface.
Sound & vibration
Set “Vibration” intensity, turn on “Media audio” and turn on “Mute” mode.
Note: When turning on media audio, the watch can sync all sound playback of mobile phone, such as voice as-sistant and music playback.
Bright
Set the brightness and screen time.
Raise to wake
Turn on/off “Raise to wake”.
Password
Set “Password Switch”, when forgetting password, please reset the watch to factory settings in the mobile APP.
Do not disturb
Set the start time and end time of “Do not disturb” mode.
QR Code
Scan to connect to the watch or download the APR
System
“Reboot”, “Power off”, “Re-set” the watch.
Info
Check “Device name”, “Device version”, “Bluetooth address”.
Press the side button to enter the menu to see more functions when the screen is on
Call
You can select “Contacts” or use “Dial Pad” to dial calls. And you can check “Call Logs” on the watch.
Note: Click to hang up, click to adjust the volume, click g to turn on/off microphone. The other party can hear you when the microphone is on, but cannot hear you when the microphone is off Contact Person setting
Open the app – Click the third small icon “Device” at the bottom – Click “Bluetooth Call”- Click “Sync Contacts” -Click “Open” – on the App “GloryFit” Would Like to Access Your Contacts that pops up and select “OK” to sync contacts to the watch.
Daily Exercise
Swipe down on the interface can check “Calories”, “Dis-tance”, “Steps”(Step details and Weekly data).
Heart Rate
Monitor heart rate, and slide down on the interface to view heart rate change chart for a week
Note: To view the 24-hour real-time heart rate change graph, open the app and find the third small icon “De-vice” at the bottom of the page- Click “Heart rate set-tings”- Turn on “Automatic” and “Maximum heart rate reminder”, when the heart rate is more than this value, the device will vibrate to remind you.
Training
Choose a training mode, swipe down on the interface to view training time, heart rate, steps, calories, etc., swipe right to continue/exit training mode, swipe left to enter music control interface.
Blood Oxygen
Monitor blood oxygen and view the 24-hour blood oxygen change graph, open the app and find the third small icon “Device” at the bottom of the page – Click “Blood oxygen setting”- Turn on “Automatic setting” and set “Time period” and “Cycle”.
Sleep
Monitor sleep data, slide down on the interface to view deep sleep light sleep, awake time, and REM(rapid eye movement).
Weather
Check the weather, swipe down on the interface to view future weather for next three days.
Alarm Clock
Click “+” to choose “Time” and “Repeat” , and swipe right on the interface to save the alarm clock after setting.
Voice Assistant
Click to wake up the voice assistant Note: Need to turn on “Media audio” on Settings of the watch.
SOS
Open the app – Click the third small icon “Device” at the bottom – Click “SOS Contact” to set
Female Health
Open the app – Click the fourth small icon “Profile” at the bottom – Click “Physiological cycle” to set reminders
Note: When registering an account, the gender must be female.
Open the app – Click the fourth small icon “Profile” at the bottom – Click on the avatar to set personal information
Shake to Take Picture
Open the app – Click the third small icon “Device” at the bottom – Click “More settings”- Click “Shake to take picture” to enter photograph function
SMS
Open the app – Click the third small icon “Device” at the bottom – Turn on message notification
Note: The watch cannot reply text messages.

Charge

For charging, please place the watch flat, and make sure the metal holes on the back are aligned with the metal tip of the charging head (charging contact spac-ing:4mm).
Note:

1. The rated voltage of the charging head is 5V/0.5A. 2)Please do not use the vehicle power supply to charge, to avoid causing the charging cable to age or burn out due to the unstable voltage.

Replace the watchband

Slide the switch of the watch-band, and replace the same specification(watchband width: 22mm).

Precautions

1. Please clean your watch regularly.
2. Please do not wear it too tight to avoid discomfort.
3. Please do not use for swimming. When getting wet, be sure to dry the water on the watch before operating.

Specifications

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:?
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Model number: FF1
FCC ID: 2A7YB-FF1
Brand Name: Parsonver
IC: 30206-FF1
HVIN: FF1
UK RP OCEAN SUPPORT LTD
[email protected]
Amber, Office 119, Luminous House 300 ka South Row, Milton keynes, MK9 2FR
EC REP UE Fast Refund GmbH
[email protected]
+4994175083048
Friedrich-Alfred-StraBe 184 Duisburg 47226 Deutschland
MADE IN CHINA

Documents / Resources

| PARSONVER FF1 Smartwatch [pdf] User Manual
FF1 Smartwatch, FF1, Smartwatch
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>